We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical lithium battery with wire leads and connector, 15 mm by 51 mm

DUSLAN

DUSLAN LS14500-MDS 3.6V 2450mAh Lithium Battery

SKU CH-8VND-QXT3T

3.6 V lithium cell with wire-lead connector powers Mitsubishi MR-J3 and Yaskawa Sigma II servo drives, 2450 mAh capacity in a 15 mm by 51 mm package

  • 6 V lithium chemistry delivers 2450 mAh capacity for long PLC runtime
  • Wire leads with connector enable direct fit to Mitsubishi MR-J3 servo drives
  • Compatible with YASKAWA Sigma II absolute encoder CN1 and BA000518 units
  • Compact 15 mm diameter by 51 mm length suits tight control panels
  • Light 14 gram weight reduces harness load in high-vibration automation cells

Direct replacement for Mitsubishi PLC systems

This 3.6 volt lithium battery supplies 2450 mAh capacity and matches part number LS14500-MDS. It is built for Mitsubishi MelServo MR-J3 series drives and YASKAWA Sigma II absolute encoders that require the ER6V-C119B or MR-J3BAT reference.

Simple two-wire connector installation

The pack arrives with wire leads and a fitted connector so no soldering is needed. Polarity must be observed when plugging into the drive; reversing the leads can damage the encoder backup circuit. A gentle push seats the connector fully without forcing the 15 mm wide body.

Confirm drive model and connector type first

Check that your servo drive appears in the supported list such as MR-J3-B, MR-J3-T4 or YASKAWA BA000518 before ordering. Verify the existing battery uses the same two-pin connector layout and 51 mm overall length. Systems using a different pin pitch or voltage will not be compatible.

Highlights

  • 6 V lithium chemistry delivers 2450 mAh capacity for long PLC runtime
  • Wire leads with connector enable direct fit to Mitsubishi MR-J3 servo drives
  • Compatible with YASKAWA Sigma II absolute encoder CN1 and BA000518 units
  • Compact 15 mm diameter by 51 mm length suits tight control panels
  • Light 14 gram weight reduces harness load in high-vibration automation cells

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the LS14500-MDS is working after installing it in my MR-J3 servo?

The servo should retain its absolute encoder position after a power cycle; if the position is lost or a battery alarm appears, the cell is not making proper contact.

What comes with the battery and what must I source separately?

The unit is a single 3.6 V lithium cell with wire leads and the CN1-style connector already attached; no additional cables or mounting hardware are included.

Which part number should I order for a YASKAWA Sigma II encoder?

Order the LS14500-MDS — it cross-references to YASKAWA BA000518 and fits the Sigma II absolute encoder connector CN1.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.