We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DUSLAN

DUSLAN ER14250 1/2 AA 3.6 V 1200 mAh Lithium Battery

SKU CH-KW23-NY3WN

A 1/2 AA 3.6 V primary lithium thionyl chloride cell delivering 1200 mAh for backup power, metering, medical or industrial equipment across -55 °C to +85 °C

  • Battery Type1/2 AA Lithium
  • Long-lasting backup power from 1200 mAh lithium thionyl chloride chemistry
  • Reliable operation across extreme temperatures from -55 °C to +85 °C
  • Compact 1/2 AA size fits space-constrained devices at 14.5 mm diameter
  • High 3.6 V nominal voltage supports meter, medical and telecom equipment
  • Extended shelf life with recommended storage up to +30 °C

1/2 AA lithium thionyl chloride cell

The DUSLAN ER14250 is a 3.6 volt primary lithium battery with a nominal capacity of 1200 mAh. It fits devices that require the 1/2 AA form factor and operates reliably from minus 55 to plus 85 degrees Celsius. Typical applications include backup power for circuit boards, utility meters, medical equipment and LED lighting. This cell is not rechargeable and must not be placed in a charger.

No accessories or software included

The product is supplied as a single bare cell without tabs, holders, cables or any configuration software. Integration into a device therefore requires separate procurement of a suitable battery holder or direct soldering to the printed circuit board within a few seconds to avoid heat damage. No firmware, drivers or management utilities are provided or needed for this primary chemistry.

Limits of primary lithium chemistry

As a non-rechargeable lithium thionyl chloride cell, the ER14250 cannot be recharged; attempting to do so creates a safety hazard. Self-discharge is very low, but the supplier recommends storage below plus 30 degrees Celsius in a clean, dry, ventilated area to preserve the 3.66 volt open-circuit voltage. The 14.5 millimetre diameter and 25.25 millimetre height fix the mechanical envelope, so compartments sized for other 1/2 AA variants must be verified before use.

Highlights

  • Long-lasting backup power from 1200 mAh lithium thionyl chloride chemistry
  • Reliable operation across extreme temperatures from -55 °C to +85 °C
  • Compact 1/2 AA size fits space-constrained devices at 14.5 mm diameter
  • High 3.6 V nominal voltage supports meter, medical and telecom equipment
  • Extended shelf life with recommended storage up to +30 °C

Specifications

Battery Type1/2 AA Lithium

Questions about this item

When will the 1200 mAh Li-SOCl2 cell need replacement in a backup circuit?

Replace when open-circuit voltage drops below the 3.6 V your circuit requires; the 1200 mAh capacity determines how long that takes in your specific load.

What thermal limit appears first during continuous 100 mA discharge?

The 85 °C operating ceiling is reached before any voltage sag; the cell is rated to +85 °C and storage must stay under +30 °C.

Does the 14.5 mm × 25.25 mm primary lithium cell generate noticeable heat or noise during all-day metering duty?

No audible noise; self-heating at typical meter currents stays well inside the -55 °C to +85 °C range, so the case remains near ambient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.