We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
C-size lithium battery with spot-welded tabs on both ends

DUSLAN

DUSLAN C LS26500 ER26500 3.6V 9000mAh Lithium Battery with Tabs

SKU CH-WQTE-B4B3Y

A 3.6 V lithium thionyl chloride cell delivering 9000 mAh with welded tabs for meter, alarm and GPS equipment

  • 9000 mAh capacity powers devices longer
  • 6 V nominal voltage suits specialist electronics
  • Low self-discharge under 1% per year enables 10-year shelf life
  • Wide -55 °C to +85 °C operating range handles extreme environments
  • Spot-welded tabs allow secure direct soldering

DUSLAN C 9000mAh 3.6V Primary Lithium Battery

The DUSLAN C LS26500 ER26500 is a primary lithium thionyl chloride cell delivering 3.6 volts and 9000mAh capacity. It features spot-welded tabs on each end for direct soldering into equipment. The hermetic glass-to-metal seal and non-flammable electrolyte ensure safe operation across a wide temperature range from -55°C to +85°C. It holds UL approval under reference MH30127.

Suits long-life remote sensors and backup circuits

This cell suits metering systems, alarms, GPS beacons, radio communication gear and military equipment needing up to ten years of standby power with less than one percent annual self-discharge. Continuous current is limited to 200mA and pulse current to 400mA, so it cannot drive high-drain motors or transmitters requiring sustained amperage. Buyers needing rechargeable chemistry or higher continuous current should look elsewhere.

Spot-welded tabs enable direct PCB mounting

The pre-attached tabs remove the need for separate battery holders or spring contacts, reducing assembly height and improving vibration resistance in portable or vehicle-mounted devices. No charger, programming cable or configuration software is included because the chemistry is non-rechargeable and application-specific. The tabs are the only accessory supplied.

Highlights

  • 9000 mAh capacity powers devices longer
  • 6 V nominal voltage suits specialist electronics
  • Low self-discharge under 1% per year enables 10-year shelf life
  • Wide -55 °C to +85 °C operating range handles extreme environments
  • Spot-welded tabs allow secure direct soldering

Specifications

No published specifications for this item yet.

Questions about this item

Does the 26.2 mm diameter and 50.5 mm height fit the C-size holder in my meter?

The cell measures 26.2 mm diameter by 50.5 mm height, matching standard C-size dimensions for direct fit.

Will the 3.6 V open-circuit voltage damage older 3.6 V nominal gear I keep in service?

Open-circuit voltage is 3.66 V and nominal voltage under load is 3.6 V, matching the 3.6 V rating of existing equipment.

How can I verify the 9000 mAh capacity is delivering after installation?

Measure open-circuit voltage near 3.66 V and confirm the device draws within the 200 mA continuous or 400 mA pulse limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.