We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 7.2V NiMH battery pack with standard Tamiya connector, plus wall charger and car charger

DUSLAN

DUSLAN 7.2V 4200 mAh NiMH pack with wall and car chargers

SKU CH-7Y33-EKBYM

7.2 V 4200 mAh NiMH stick pack with Tamiya connector includes AC and 12 V DC smart chargers with selectable 1.3 A or 3.2 A currents and delta-V cutoff

  • Battery TypeBattery Pack
  • High 4200 mAh capacity extends RC run times
  • Includes wall and car chargers for flexible charging
  • Smart charger auto-stops at full charge preventing overcharge
  • Selectable 1.3 A or 3.2 A charge rates suit different packs
  • Standard Tamiya connector fits major RC brands

Ready-to-run RC power pack

This 7.2 V NiMH battery pack delivers 4200 mAh capacity in a flat six-cell Sub-C stick configuration. It ships with both a wall charger and a 12 V car charger so drivers can top up at home or trackside. The standard Tamiya connector fits Associated, HPI, Losi, Traxxas, Tamiya, Kyosho and other common 7.2 V chassis without adapters.

Wall and car charging thermals

The AC wall unit runs from 110 V input and supplies 12 V at 300 mA, taking roughly 2.5 hours for a 700 mAh Ni-Cd pack. The smart DC charger plugs into a 12 V vehicle socket and offers selectable 1.3 A or 3.2 A currents with negative delta-V cut-off, a maximum safety timer and fuse protection against over-current, short-circuit and reverse polarity. LED indicators show fast-charge and trickle-charge status while typical fills complete in 30 to 60 minutes.

Tamiya connector compatibility

A standard Tamiya plug is factory-fitted to the pack and both chargers include matching Tamiya leads so the system works out of the box. Builders whose vehicles use Deans, XT60, EC3 or other proprietary connectors will need separate adapter cables which are not supplied.

Highlights

  • High 4200 mAh capacity extends RC run times
  • Includes wall and car chargers for flexible charging
  • Smart charger auto-stops at full charge preventing overcharge
  • Selectable 1.3 A or 3.2 A charge rates suit different packs
  • Standard Tamiya connector fits major RC brands

Specifications

Battery TypeBattery Pack

Questions about this item

How do I connect the battery pack to my RC car using the standard Tamiya connector?

Align the standard Tamiya connector on the pack with the matching socket on the vehicle, push firmly until it clicks, and verify polarity before the first run.

What maintenance will the NiMH pack need over time?

Store the 4200 mAh pack at roughly half charge in a cool place, cycle it every few months, and replace it when run time drops noticeably.

Which limit appears first during sustained high-current use with the 1.3 A or 3.2 A car charger settings?

The negative delta V cut-off stops the charge automatically when the pack reaches full capacity, preventing overcharge during extended sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.