DUSLAN
DUSLAN 6-Pack 14500 3.7V 750 mAh Li-Ion Battery with Tabs
Six 14500 lithium-ion cells with solder tabs deliver 3.7 V and 750 mAh each for custom pack building
- Battery TypeAA
- 7 V nominal voltage powers high-drain devices
- 750 mAh capacity delivers extended runtime per cell
- Solder tabs on both ends enable secure pack assembly
- 14500 form factor matches AA dimensions for direct fit
- Lithium-ion chemistry avoids memory effect for flexible charging
Six-cell 14500 lithium-ion pack
This six-cell pack supplies 3.7-volt 14500 lithium-ion cells with solder tabs on both ends. Each cell delivers 750 mAh capacity and fits the physical footprint of a standard AA battery. The tabs allow direct series or parallel wiring for custom battery packs. Users must understand lithium-ion charging and discharging safety before assembly.
Charging and discharge limits
Maximum charging current is 0.75 A and maximum discharging current is 1.9 A per cell. Exceeding these limits can cause overheating, venting or fire. A protection circuit or smart charger designed for 3.7-volt lithium-ion chemistry is required. The cells have no memory effect and offer long storage life when kept at proper voltage.
3.7-volt nominal voltage constraint
These cells operate at 3.7 volts nominal, roughly three times the voltage of alkaline or NiMH AA cells. They are not drop-in replacements for 1.5-volt devices and will damage equipment designed for lower voltage. The pack suits builders who need high energy density in an AA form factor and can engineer the correct voltage regulation.
Highlights
- 7 V nominal voltage powers high-drain devices
- 750 mAh capacity delivers extended runtime per cell
- Solder tabs on both ends enable secure pack assembly
- 14500 form factor matches AA dimensions for direct fit
- Lithium-ion chemistry avoids memory effect for flexible charging
Specifications
| Battery Type | AA |
|---|
Questions about this item
Should I choose the 6-pack or buy single cells for my project?
The product is only sold as a 6-pack containing six 14500 cells with tabs on both ends, so individual cells are not offered separately.
What does the 3.7 V rating mean when I put these in a device?
Each cell delivers 3.7 V nominal, which is three times the voltage of a standard 1.2 V AA; ensure your device or pack design can handle the higher voltage before use.
What charging standard do the tabs follow and what current limit applies?
The tabs are simple solder terminals with no proprietary protocol; the supplier specifies a maximum charging current of 0.75 A and a maximum discharge current of 1.9 A per cell.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



