Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01001193BTC
In stock
DUSLAN
DUSLAN 3.2 V 14430 LiFePO4 400 mAh standard battery
3.2 V LiFePO4 14430 cell delivers 400 mAh capacity and up to 2000 charge cycles in a 14 mm diameter format
- Battery Typebuffer_79244
- 2 V nominal voltage powers compatible 14430 devices reliably
- 400 mAh capacity replaces multiple lower-capacity cells up to 600 mAh
- LiFePO4 chemistry delivers up to 2000 charge cycles with no memory effect
- Lightweight 17 g cell with 75.29 Wh/kg energy density suits space-constrained designs
- 14 mm diameter by 43.5 mm length fits 4/5 AA form factor precisely
What this battery is and who needs it
This DUSLAN 14430 LiFePO4 cell delivers 3.2 Volt nominal voltage and 400 mAh capacity in a 4/5 AA form factor measuring 43.5 mm by 14 mm. It suits devices that specify a 14430 lithium phosphate power source and benefit from up to 2000 charge cycles with no memory effect.
Who it suits and who should look elsewhere
Builders replacing 500 mAh, 350 mAh, 300 mAh or 250 mAh cells in compatible equipment will find this a direct fit. Buyers whose device requires a full AA length, a different chemistry or a voltage other than 3.2 Volt cannot use this battery.
Installation ease and common pitfalls
The cell slides into a standard 14430 holder; observe polarity and never exceed the 0.4 A charge or 0.8 A discharge limits. The most frequent error is confusing the shorter 14430 size with a full AA, so verify the 14430 marking on the old cell before ordering.
Highlights
- 2 V nominal voltage powers compatible 14430 devices reliably
- 400 mAh capacity replaces multiple lower-capacity cells up to 600 mAh
- LiFePO4 chemistry delivers up to 2000 charge cycles with no memory effect
- Lightweight 17 g cell with 75.29 Wh/kg energy density suits space-constrained designs
- 14 mm diameter by 43.5 mm length fits 4/5 AA form factor precisely
Specifications
| Battery Type | buffer_79244 |
|---|
Questions about this item
What charger do I need for this 3.2 Volt LiFePO4 14430 cell?
Use a charger made for 3.2 Volt LiFePO4 chemistry with a maximum charge current of 0.4A.
Can I mix this 400 mAh 14430 cell with my older 350 mAh or 500 mAh 14430 cells in the same device?
No. Different capacities cause uneven charge and discharge, which can damage the cells and the device.
How can I confirm the 14430 battery is working correctly after I install it?
Measure the voltage; a healthy cell reads around 3.2 Volt and the device should run for the expected time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
