We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black charger unit with cooling vents, Tamiya output cable and clip adapter, LED charge indicators on front

DUSLAN

DUSLAN 25.6 V LiFePO4 Battery Pack 6 A Smart Charger

SKU CH-27MW-RSA45

A 25.6 V LiFePO4 battery-pack charger delivers 29.4 V at 6 A with CCCV charging, LED charge indicators and built-in cooling fan

  • Battery TypeBattery Pack Charger
  • Charges 25.6 V LiFePO4 packs at 6.0 A for fast replenishment
  • CCCV mode stops at 29.4 V to prevent overcharge
  • LED steps at 20, 40, 60, 80 and Full show exact state
  • Protection against short circuit, over-voltage and reversed output
  • Fan cooling and CE listing support long service life

Smart charger for LiFePO4 packs

This 25.6 V LiFePO4 battery pack charger delivers 29.4 VDC at 6 A using CCCV charging mode and stops automatically when the pack reaches full voltage. It is built for packs rated at 24.8 V with a capacity of 6000 mAh or higher and includes LED indicators that show charge level at 20%, 40%, 60%, 80% and full. Short circuit, over-voltage and output-reversed protection are integrated, and a built-in cooling fan supports long service life. The unit carries CE listing.

Mains input and output connection

The charger accepts 99-121 VAC at 47-63 Hz through a USA AC plug and provides output via 14 AWG wire terminated with a standard female Tamiya plug. A connector adapter from Tamiya plug to clips is included for alternative attachment. Dimensions are 174 mm by 138 mm by 67 mm and weight is 3.0 lbs (1361 grams). Charge time can be estimated as pack Ah multiplied by 1.41 divided by 6.0 A charge current.

Not for other chemistries or smaller packs

This charger is not suitable for lead-acid, lithium-ion or other battery chemistries. It will not charge packs below 6000 mAh capacity or packs with a different nominal voltage. Buyers needing a charger for other voltages, higher current or different connector types should select a model specified for those requirements.

Highlights

  • Charges 25.6 V LiFePO4 packs at 6.0 A for fast replenishment
  • CCCV mode stops at 29.4 V to prevent overcharge
  • LED steps at 20, 40, 60, 80 and Full show exact state
  • Protection against short circuit, over-voltage and reversed output
  • Fan cooling and CE listing support long service life

Specifications

Battery TypeBattery Pack Charger

Questions about this item

How long will the built-in cooling fan run before the charger overheats during a full charge cycle?

The charger includes a built-in cooling fan designed to ensure long service life, and charge time follows the formula (Ah rate of the pack × 1.41) ÷ 6.0 A.

How loud is the cooling fan when the charger runs continuously for a full day?

The built-in cooling fan operates to ensure long service life, and the unit measures 174 mm × 138 mm × 67 mm at 3.0 lbs.

Which battery packs can I connect directly using the included Tamiya-to-clips adapter?

The smart charger is designed for 24.8 V LiFePO4 packs of 6000 mAh or higher, outputting 29.4 VDC at 6.0 A with a standard female Tamiya plug.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.