We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 24V NiMH battery pack in black shrink wrap with Tamiya connectors

DUSLAN

DUSLAN 24V 5000 mAh NiMH battery pack 20 C cells

SKU CH-MF1D-022MD

24 V NiMH pack with 5000 mAh capacity, Tamiya discharge and charge leads plus a 65 °C thermostat for overcharge protection

  • Battery TypeBattery Pack
  • 24 V NiMH chemistry powers 24 V DC devices
  • 5000 mAh capacity doubles robot run time versus NiCd
  • 7 lb pack weighs 50 % less than SLA equivalent
  • Heavy-duty polyolefin shrink tubing shields 20 C cells
  • Male Tamiya discharge plus mini Tamiya charge with 65 °C thermostat

24V NiMH pack for portable DC devices

This 24 volt nickel-metal hydride battery pack delivers 5000 mAh capacity for robots and other 24V DC portable equipment. It uses twenty C-size cells arranged in a 7 by 6 by 7 configuration. The pack weighs 3.7 lb and measures 7 by 2.75 by 2 inches.

Installation uses standard Tamiya plugs

A male standard Tamiya connector on 14 AWG wires handles discharge while a mini Tamiya connector on 16 AWG wires handles charging. A 65 degree thermostat in the charging terminal protects against overcharging. Heavy-duty polyolefin shrink tubing adds mechanical protection during handling.

Verify voltage and current limits before ordering

Your device must operate at 24 volts and draw no more than 10 amps peak or 5 amps continuous. The charger must not exceed 3.3 amps and should ideally run at 1.5 amps. A BEC female plug for the included temperature sensor is required on the charging side.

Highlights

  • 24 V NiMH chemistry powers 24 V DC devices
  • 5000 mAh capacity doubles robot run time versus NiCd
  • 7 lb pack weighs 50 % less than SLA equivalent
  • Heavy-duty polyolefin shrink tubing shields 20 C cells
  • Male Tamiya discharge plus mini Tamiya charge with 65 °C thermostat

Specifications

Battery TypeBattery Pack

Questions about this item

How can I confirm the pack is delivering its rated 5000 mAh after I wire it up?

Run a controlled discharge at the standard 5 Amp rate down to the recommended cut-off voltage and verify the measured capacity reaches 5000 mAh.

What connectors and accessories are included, and what must I source separately?

The pack ships with a male standard Tamiya discharge plug on 14 AWG wires, a mini Tamiya charge plug on 16 AWG wires, and a 65 °C thermostat plus a BEC female temperature sensor already installed; you only need a compatible NiMH charger.

Which capacity or cell configuration should I pick for my 24 V robot?

This model is a fixed 24 V, 5000 mAh pack built from 20 C-size cells in a 7 × 6 × 7 arrangement; there are no alternative capacities or configurations offered for this SKU.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.