DUSLAN
DUSLAN 24-Pack 3.2V 600mAh LiFePO4 14500 AA standard battery
A 24-pack of 3.2V 600mAh LiFePO4 AA-size 14500 cells delivering up to 1000 charge cycles with no memory effect
- LiFePO4 chemistry delivers stable 3.2 V output
- 600 mAh capacity replaces lower-rated 250 mAh to 500 mAh cells
- Up to 1000 charge cycles with no memory effect
- 24-pack supplies 19.8 g lightweight AA-size 14500 cells each
- Max charge and discharge current rated at 0.6 A
24-pack LiFePO4 14500 cells
This pack contains 24 DUSLAN 14500 LiFePO4 cells with a 3.2 V nominal voltage and 600 mAh capacity. They are built for devices that specifically require the higher-voltage lithium-phosphate chemistry in the standard AA form factor. Each cell weighs 19.8 g and measures 50 mm by 14 mm.
Check voltage and dimensions first
These cells deliver 3.2 V, which is three times the voltage of standard alkaline or NiMH AA batteries. Verify that your equipment explicitly supports 3.2 V LiFePO4 chemistry before fitting them. Confirm the compartment accepts the 14500 or 14505 size codes and not the shorter 14430 variant.
Charger and device pairing
Use only a charger rated for 3.2 V LiFePO4 with a maximum charge current of 0.6 A. The cells support a 0.6 A maximum discharge current, so match them to loads within that limit. They replace lower-capacity 14500 cells ranging from 200 mAh to 800 mAh and offer up to 1000 charge cycles with no memory effect.
Highlights
- LiFePO4 chemistry delivers stable 3.2 V output
- 600 mAh capacity replaces lower-rated 250 mAh to 500 mAh cells
- Up to 1000 charge cycles with no memory effect
- 24-pack supplies 19.8 g lightweight AA-size 14500 cells each
- Max charge and discharge current rated at 0.6 A
Specifications
No published specifications for this item yet.
Questions about this item
Does the 24-pack include a charger or do I need to buy one separately?
The pack contains only the 24 LiFePO4 14500 cells; a compatible 3.2 V charger must be purchased separately.
Should I choose the 600 mAh version or a lower-capacity cell for my device?
The 600 mAh cells replace 500 mAh, 400 mAh and 250 mAh types and fit any device that accepts 14500 or 14505 size.
What does the 3.2 V rating mean when I put these in equipment made for 1.5 V AA batteries?
Each cell delivers 3.2 V — roughly three times the voltage of alkaline AA — so the device must explicitly support LiFePO4 chemistry.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



