DUSLAN
DUSLAN 18500 3.2 V LiFePO4 Flat Top 900 mAh
3.2 V LiFePO4 18500 flat-top cell delivers 900 mAh with up to 2000 charge cycles and 0.8 A continuous current
- 2 V nominal voltage suits LiFePO4 devices
- 900 mAh capacity replaces 600 mAh to 1000 mAh cells
- Flat-top terminals fit 18.1 mm diameter holders
- Up to 2000 charge cycles extend service life
- 2 g weight keeps portable gear light
DUSLAN 18500 3.2 V LiFePO4 Cell
The DUSLAN 18500 is a 3.2 Volt lithium iron phosphate battery with a 900 mAh capacity and flat-top terminals. It measures 50 mm in length and 18.1 mm in diameter, weighing 31.2 g. The chemistry provides a long storage life and up to 2000 charge cycles without memory effect.
Suitable Uses and Limitations
This cell suits devices requiring a single 18500 LiFePO4 power source with a 0.8 Amp maximum continuous current rating. It replaces legacy cells rated at 600 mAh, 750 mAh, 800 mAh, 850 mAh, and 1000 mAh. Builders needing higher discharge rates, greater capacity, or a different form factor should look elsewhere.
Deciding Specification
The nominal voltage of 3.2 Volts determines compatibility; it is not interchangeable with 3.6 Volt or 3.7 Volt lithium-ion 18500 cells. The flat-top terminal design requires spring-loaded contacts or solder tabs in the host device. Verify the equipment specifies LiFePO4 chemistry and 3.2 Volt operation before purchase.
Highlights
- 2 V nominal voltage suits LiFePO4 devices
- 900 mAh capacity replaces 600 mAh to 1000 mAh cells
- Flat-top terminals fit 18.1 mm diameter holders
- Up to 2000 charge cycles extend service life
- 2 g weight keeps portable gear light
Specifications
No published specifications for this item yet.
Questions about this item
What device or charger do I need that accepts an 18500 3.2 V LiFePO4 flat-top cell?
You need equipment designed for 18500 size LiFePO4 chemistry at 3.2 V nominal; the flat-top terminals require spring or solder contacts, not button-top holders.
Will this 900 mAh cell safely replace the 800 mAh or 1000 mAh packs I already use?
Yes — it replaces 600, 750, 800, 850 and 1000 mAh versions; the 0.8 A max charge and discharge limits match typical 18500 LiFePO4 packs.
How can I verify the battery is healthy after the first charge cycle?
Measure open-circuit voltage near 3.2 V, confirm it accepts up to 0.8 A charge current without overheating, and delivers 0.8 A load for the expected runtime.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



