DUSLAN
DUSLAN 1756-BA2 3V 1200mAh Lithium 2/3A PLC Battery
3 V lithium 2/3 A cell with 1200 mAh capacity, wire leads and connector, rated −60 °C to +85 °C for ControlLogix 5561, 5562, 5563 and 5564 Series B processors
- Battery Type2/3 A
- 3 V lithium chemistry delivers 1200 mAh capacity for extended PLC memory backup
- Wide -60 °C to +85 °C operating range suits harsh industrial environments
- Wire leads with connector enable direct drop-in replacement for Allen Bradley 1756-BA2
- Compact 17 mm diameter by 35 mm length fits tight control-panel spaces
- Compatible with ControlLogix 5561 5562 5563 5564 and 1756-L61 L62 L63 L64 L6x LSP controllers
Direct PLC replacement
This 3 V lithium cell replaces the Allen Bradley 1756-BA2 backup battery used in ControlLogix 5561 5562 5563 5564 and 1756-L61 L62 L63 L64 L6x LSP processors. It ships new with wire leads and a connector ready for installation.
Compact wire-lead design
The cylindrical 2/3 A cell measures 17 mm diameter by 35 mm length and weighs 36 g. Wire leads with the factory connector allow a direct swap without soldering while the -60 °C to +85 °C operating range suits harsh industrial cabinets.
Verify processor series before ordering
Confirm your controller is a Series B 1756-L61 L62 L63 L64 L6x or LSP model or a ControlLogix 5561 5562 5563 5564 unit. The battery is not compatible with Series A processors or other PLC families.
Highlights
- 3 V lithium chemistry delivers 1200 mAh capacity for extended PLC memory backup
- Wide -60 °C to +85 °C operating range suits harsh industrial environments
- Wire leads with connector enable direct drop-in replacement for Allen Bradley 1756-BA2
- Compact 17 mm diameter by 35 mm length fits tight control-panel spaces
- Compatible with ControlLogix 5561 5562 5563 5564 and 1756-L61 L62 L63 L64 L6x LSP controllers
Specifications
| Battery Type | 2/3 A |
|---|
Questions about this item
What voltage does the 1756-BA2 lithium cell supply to the PLC memory backup circuit?
The cell provides a steady 3 volt output to maintain processor memory during power loss.
Will the 17 mm diameter and 35 mm length fit the battery compartment of a 1756-L62 Series B controller?
Yes, those dimensions match the 2/3 A form factor required by the listed ControlLogix processors.
How do you connect the wire leads with connector when replacing the battery in a 1756-L63 unit?
Power down the chassis, unplug the old connector, insert the new cell, and press the keyed plug firmly until it clicks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



