DUSLAN
DUSLAN 14.8V 2600 mAh Lithium-Ion Battery Pack
A 14.8 V lithium-ion pack built from four 18650 cells delivering 2600 mAh with integrated 7 A PCB and 4.2 A polyswitch protection
- Battery TypeBattery Pack
- 2600 mAh capacity powers devices longer between charges
- Built-in 7 A PCB guards against over-charge, over-discharge and short circuits
- 2 A polyswitch limits peak current and blocks reverse polarity
- UN 38.3 certified for safe air and ground transport
- Compact 2.9" × 2.5" × 0.8" pack fits tight equipment bays
What this battery pack is
The DUSLAN 14.8 V 2600 mAh lithium-ion pack uses four 18650 cells in series and includes a 7 A protection PCB plus a 4.2 A polyswitch. It supplies a working voltage of 14.4 V or 14.8 V with a peak of 16.8 V and a cut-off at 11 V. The pack measures 2.9 by 2.5 by .8 inches and weighs 6 oz.
What to check before ordering
Confirm your device accepts a 14.4 V or 14.8 V nominal input and can tolerate a 16.8 V peak. The built-in PCB limits discharge to 4.2 A and charging current to 2.5 A, so verify those limits suit your load and charger. The pack ships with 18-gauge wire leads and PVC shrink wrap rather than a standard connector.
Who this suits and who should look elsewhere
Makers and technicians building portable equipment, robotics or test rigs that need a lightweight 14.8 V source with integrated over-charge, over-discharge, over-current and short-circuit protection will find it convenient. Buyers who require a higher continuous current than 4.2 A, a different voltage, or a pack with a pre-fitted proprietary connector should look at other options.
Highlights
- 2600 mAh capacity powers devices longer between charges
- Built-in 7 A PCB guards against over-charge, over-discharge and short circuits
- 2 A polyswitch limits peak current and blocks reverse polarity
- UN 38.3 certified for safe air and ground transport
- Compact 2.9" × 2.5" × 0.8" pack fits tight equipment bays
Specifications
| Battery Type | Battery Pack |
|---|
Questions about this item
Does the DUSLAN 14.8V 2600 mAh pack ship with a charger or do I need to buy one separately?
The pack arrives wrapped in PVC shrink with 18 G wire leads; no charger is included, so a compatible 14.8 V lithium-ion charger must be purchased separately.
I see two working voltages listed — 14.4 V and 14.8 V — which one should I match my device to?
14.4 V is the nominal voltage and 14.8 V is the typical full-charge voltage; choose a device rated for the 14.4 V nominal range.
What does the 2600 mAh rating actually deliver when the pack is powering a real load?
At the 4.2 A polyswitch limit the pack supplies about 2.6 Ah before the 11 V cut-off; at lower currents you will approach the full 2600 mAh.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



