DUSLAN
DUSLAN 12 V NiMH Battery Pack 5000 mAh 10 C Cells
12 V NiMH pack built from ten C cells delivers 5000 mAh with standard and mini Tamiya connectors
- Battery TypeBattery Pack
- 12 V NiMH chemistry delivers 60 Wh capacity for longer run time
- 5000 mAh rated capacity powers 12 V portable devices reliably
- 10 C cell pack in 5×2 layout fits 134 mm × 51 mm × 51 mm space
- Male standard Tamiya discharge plug with 16 AWG wires enables high-current output
- Mini Tamiya charge plug with 18 AWG wires and 65 °C thermostat prevents overcharging
12 V NiMH Pack with 5000 mAh Capacity
This 12-volt nickel-metal-hydride battery pack stores 5000 mAh or 60 Wh across ten C cells in a 5-by-2 arrangement. It suits portable devices that need a 12 V DC source such as walking robots, photography lighting or video equipment. The pack weighs 2.2 lb and measures 5.25 by 2 by 2 inches.
Tamiya Connectors and Built-in Thermostat
Verify that your device accepts a male standard Tamiya plug on 16 AWG leads for discharge and a mini Tamiya plug on 18 AWG leads for charging. The charging lead includes a 65 °C thermostat wired to the pack to guard against over-charging. Confirm the polarity and voltage match before connecting.
Replaces NiCd Packs for Longer Runtime
The pack doubles the run time of a comparable nickel-cadmium pack while delivering up to 10 A peak discharge and accepting a 5 A fast charge. It is not suited for applications that demand higher voltage, greater capacity or a different connector standard.
Highlights
- 12 V NiMH chemistry delivers 60 Wh capacity for longer run time
- 5000 mAh rated capacity powers 12 V portable devices reliably
- 10 C cell pack in 5×2 layout fits 134 mm × 51 mm × 51 mm space
- Male standard Tamiya discharge plug with 16 AWG wires enables high-current output
- Mini Tamiya charge plug with 18 AWG wires and 65 °C thermostat prevents overcharging
Specifications
| Battery Type | Battery Pack |
|---|
Questions about this item
What connectors come on the pack and what do they plug into?
The pack has a male standard Tamiya connector on 16 AWG wires for discharging and a mini Tamiya connector on 18 AWG wires for charging, with a 65o thermostat attached to the charging lead.
Which capacity and voltage version should I pick for a 12 V robot?
This model is a 12 Volt NiMH pack rated at 5000 mAh (60 Wh) built from 10 C cells in a 5 x 2 configuration.
What does the 5000 mAh rating mean for actual run time?
At the standard 5 A discharge rate the pack delivers roughly one hour of runtime; at the maximum 10 A rate expect about thirty minutes before voltage drops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



