Hollaender
Hollaender 70-7 External Coupling Aluminum 1.25 in storage shed
- 0.38
$10.99
0.00013168BTC
In stock
Durham
Durham 303B-15.75-17-S1157 Steel Storage Shed 20 in W
Four-drawer steel cabinet measuring 20 in wide by 15.75 in deep by 15 in high with 300 lb total capacity
- Color/FinishBlack
- Heavy-duty steel frame supports 300 lb total load
- Four 18 in wide drawers each hold 75 lb
- Powder-coated finish resists corrosion in tough environments
- Compact 20 in width fits tight workshop spaces
- 75 in deep cabinet keeps tools within easy reach
Heavy-duty steel cabinet with four drawers
The Durham 303B-15.75-17-S1157 is a powder-coated steel cabinet built for workshops that need organised, secure storage. Four sliding drawers sit in a 20 in wide frame, each rated for 75 lb. The red finish resists chips and corrosion in daily industrial use.
Static load handling and drawer operation
Each drawer carries up to 75 lb without sag, giving a total cabinet capacity of 300 lb. The powder-coated steel surfaces dissipate heat from stored tools and produce no operational noise. No power draw or active cooling is required for normal use.
Sustained loading across all drawers
When all four drawers are filled to their 75 lb rating the cabinet structure maintains alignment and the slides continue to operate smoothly. The welded steel frame prevents racking under continuous full-load conditions. Not suited for mobile applications or environments requiring lockable drawers.
Highlights
- Heavy-duty steel frame supports 300 lb total load
- Four 18 in wide drawers each hold 75 lb
- Powder-coated finish resists corrosion in tough environments
- Compact 20 in width fits tight workshop spaces
- 75 in deep cabinet keeps tools within easy reach
Specifications
| Brand | DURHAM MFG |
|---|---|
| Color/Finish | Black |
Questions about this item
How do I mount the 20 in wide steel cabinet frame to the floor or wall?
Position the 15.75 in deep frame, mark holes through the base flanges, drill anchors into concrete or studs, then bolt it down; the step most people miss is shimming the corners level before tightening so the 15 in tall drawers slide straight.
What part of the powder-coated steel drawers will need attention after heavy use?
The ball-bearing slides on each 18 in wide by 12 in deep drawer should be cleaned and lightly lubricated annually; if a slide binds, replace that slide set rather than the whole 3 in high drawer.
At what load does the cabinet frame hit its structural limit during continuous loading?
The frame is rated for 300 lb total, with each 75 lb drawer contributing; exceeding 300 lb combined weight risks permanent deflection of the steel cabinet sides.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
