We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tower duplicator with six SATA drive slots on the front

DupliM Inc

DupliM Inc 1:5 SATA Duplicator Sanitizer Tower 300MB/s 5 Targets

SKU CH-THBW-QTEEH

Standalone tower duplicates up to five SATA drives at 300 MB/s and sanitises six with DoD 5220 seven-pass wipe

  • Target1 to 5
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Creates five drive clones simultaneously
  • 300 MB/s transfer rate for fast duplication
  • Securely wipes six drives at once
  • Supports 3.5" SATA HDDs and SSDs
  • Standalone operation requires no host computer

DupliM Inc 1:5 SATA Duplicator Tower

The DupliM Inc 1:5 SATA Duplicator Tower is a standalone unit that copies one source drive to five targets at once. It handles 3.5 inch SATA HDDs and SSDs natively, with optional adapters available for 2.5 inch drives. No host computer is required for operation.

IT teams sanitising up to six drives simultaneously

Organisations needing to clone or securely erase multiple SATA drives will find the simultaneous five-target copy and six-drive sanitisation useful. The tower supports one-pass, three-pass with verify, and DoD 5220 seven-pass wipe methods. Users with drives larger than 8 TB or non-SATA interfaces should consider other equipment.

300 MB/s SATA transfer rate decides throughput

The peak 300 MB/s SATA transfer rate sets the maximum speed for every copy or wipe job. All five targets and up to six sanitisation bays share this bandwidth. Buyers should match this figure to their drive capabilities and time constraints.

Highlights

  • Creates five drive clones simultaneously
  • 300 MB/s transfer rate for fast duplication
  • Securely wipes six drives at once
  • Supports 3.5" SATA HDDs and SSDs
  • Standalone operation requires no host computer

Specifications

Target1 to 5
Data Transfer Rate300MB/s
Operating TypeStandalone

Questions about this item

What SATA transfer rate does the DupliM 1:5 duplicator actually sustain?

The unit moves data at up to 300 MB/s over SATA, so every target drive is limited by that ceiling regardless of its own rated speed.

Which drive sizes fit the tower without extra hardware?

The tower accepts 3.5-inch SATA drives directly; 2.5-inch SATA drives need the optional adapter kit (part 450100) which is not supplied.

How do I start a DoD 5220 wipe and what step is commonly missed?

Select the seven-pass DoD 5220/22-M algorithm from the front-panel menu, confirm the target bays, then press Start — forgetting to verify the bay selection before confirming is the frequent error.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.