We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel duct hanger, round form, 1 in wide strap, 15-1/2 in tall

Ductmate

Ductmate GRRDH14GA20 Duct Hanger 14 in 20 ga 1 in W 15-1/2 in H

SKU CH-8N07-C5DYF

Supports 14 in duct with 20 ga galvanised steel hanger rated for 260 lb load

  • MaterialHAWA
  • Supports 14 in duct with 260 lb capacity
  • Galvanized steel construction meets SMACNA standards
  • 20 ga thickness provides durable rigidity
  • 1 in width fits standard strapping
  • Weighs .45 lb for easy handling

Duct Hanger for 14-Inch Round Ducts

The Ductmate GRRDH14GA20 is a galvanised steel hanger designed to support round ductwork with a 14-inch nominal diameter. It is built from 20-gauge material and meets SMACNA standards for structural performance in HVAC installations.

Suited for Standard HVAC Hanging Jobs

Installers securing a single run of 14-inch round duct at loads up to 260 lb will find this hanger compatible with 1-inch strapping. It is not intended for rectangular duct profiles, larger diameters, or applications requiring a different gauge or load rating.

Fits Into Overhead Support Assemblies

The hanger measures 1 inch wide by 15-1/2 inches high and weighs 0.45 lb, allowing it to sit within typical joist or truss spaces. It connects directly to approved strapping, freeing the installer from fabricating custom brackets on site.

Highlights

  • Supports 14 in duct with 260 lb capacity
  • Galvanized steel construction meets SMACNA standards
  • 20 ga thickness provides durable rigidity
  • 1 in width fits standard strapping
  • Weighs .45 lb for easy handling

Specifications

MaterialHAWA
BrandDUCTMATE

Questions about this item

What size round duct does the 14 in hanger support?

The hanger is made for a nominal 14 in round duct and meets SMACNA standards for that diameter.

Will the 1 in wide galvanized strap I already use fit this 20 ga hanger?

Yes, the hanger is compatible with 1 in strapping size, so your existing strap will work.

How can I confirm the hanger is installed correctly and holding the rated load?

When mounted per SMACNA guidelines the hanger carries up to 260 lb; verify the duct sits level and the strap shows no deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.