Ductmate
Ductmate GRD106F2GA hvac control 11 in W 7 in H steel
Steel access door with 10-inch width, 16-gauge thickness and 300-degree temperature rating
- ColorTransparent
- Steel construction handles up to 300 °F service temperatures
- 16-gauge material thickness resists deformation under duct pressure
- 10 in × 6 in door opening allows tool access for cleaning
- Thumbscrew latches secure the panel without separate tools
- 11 in × 7 in frame fits standard rectangular duct cut-outs
Duct Access Door 11 in Wide
The Ductmate GRD106F2GA is a steel access door built for rectangular ductwork. It measures 11 inches wide by 7 inches high with a 10 by 6 inch door opening. Two mounting studs each 1 1/2 inches long secure the frame. The 16-gauge steel body uses thumbscrew latches for tool-free entry.
16-Gauge Steel Construction
The door and frame are formed from 16-gauge steel rated to 300 degrees Fahrenheit. No fire rating is assigned and no insulation is included. The transparent observation port is steel-reinforced. This gauge and temperature limit define the environments where the door can be installed safely.
Sustained High-Temperature Exposure
At continuous temperatures up to 300 degrees Fahrenheit the steel retains its shape and the thumbscrews remain operable. The uninsulated single-wall design transfers heat quickly, so adjacent duct surfaces will reach similar temperatures. The door is not rated for fire containment or extended cycles beyond the stated maximum.
Highlights
- Steel construction handles up to 300 °F service temperatures
- 16-gauge material thickness resists deformation under duct pressure
- 10 in × 6 in door opening allows tool access for cleaning
- Thumbscrew latches secure the panel without separate tools
- 11 in × 7 in frame fits standard rectangular duct cut-outs
Specifications
| Brand | DUCTMATE |
|---|---|
| Color | Transparent |
Questions about this item
What does the 11 in. width and 7 in. height tell me about the duct opening this door covers?
The door itself measures 10 in. wide by 6 in. high, so the frame fits a rough opening close to those dimensions while the overall flange extends to 11 in. by 7 in.
How does the 16 ga steel and 2,300 °F rating affect what ducts I can install it on?
Sixteen-gauge steel with a 2,300 °F maximum temperature rating suits standard sheet-metal ductwork in high-heat commercial or residential systems.
What mounting hardware is required to secure the door to the duct?
Two 1-1/2 in. mounting studs with thumbscrew latches are built in, so no separate brackets or fasteners are needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
