We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red aluminum bullet midrange speaker, 6.5 inch diameter, single driver visible

DS18 PRO-GM6B 6.5" Midrange Red Aluminum Bullet 480W Max 140W RMS 8 Ohms Car Speaker

SKU CH-WEEW-53AV1

A 6.5-inch midrange driver with red aluminium bullet styling, 140W RMS at 8 ohms and a 1.5-inch Kapton voice coil

  • TypeTweeters
  • Speaker Size5"
  • ColorBlack
  • Woofer MaterialPolypropylene
  • Surround MaterialMetal
  • MidrangeWoofer
  • Clear midrange reproduction from a 6.5" red aluminium bullet driver
  • 480W peak power with 140W RMS at 8 ohms for strong output
  • 5" high-temperature Kapton voice coil resists heat for long life
  • 160Hz low-frequency response fills the critical vocal range
  • 5" mounting depth fits standard door openings

Midrange 6.5" Bullet Speaker

The DS18 PRO-GM6B is a 6.5 inch midrange driver built for car or truck door installations. Its red aluminium bullet phase plug directs output for improved clarity across vocals and instruments. The single speaker suits enthusiasts upgrading factory systems that lack dedicated midrange coverage. It is not for buyers who need a tweeter or subwoofer in the same basket.

Power Handling 480W Max 140W RMS

The unit delivers 480 watts peak and 140 watts RMS at 8 ohms, setting the practical thermal and mechanical limits for amplifier pairing. A 1.5 inch high-temperature Kapton voice coil resists heat during extended high-output passages. Exceeding the rated RMS figure risks coil damage and compression. Builders who require more continuous power must choose a different driver.

Frequency Focus 160 Hz Mounting Depth 2.5

The published response centres on 160 hertz, indicating the band where the cone performs most linearly. Mounting depth of 2.5 inches fits many standard door cavities but will not suit shallow OEM locations. The 145 millimetre frame diameter matches the nominal 6.5 inch cutout. Installers needing a shallower profile or wider bandwidth must look elsewhere.

Highlights

  • Clear midrange reproduction from a 6.5" red aluminium bullet driver
  • 480W peak power with 140W RMS at 8 ohms for strong output
  • 5" high-temperature Kapton voice coil resists heat for long life
  • 160Hz low-frequency response fills the critical vocal range
  • 5" mounting depth fits standard door openings

Specifications

BrandPYLE
TypeTweeters
Speaker Size5"
ModelPRO-GM
ColorBlack
Woofer MaterialPolypropylene
Surround MaterialMetal
MidrangeWoofer
TweeterWoofer, 145 millimeters
Voice Coildynamic_driver, Paper membrane, kapton, rubber, steel
Frame ConstructionPaper membrane, kapton, rubber, steel
Part NumberPRO-GM6B
Peak Power30 Watts
RMS Power80 Watts
Impedance8 Ohm
Mounting Depth2.5 inches
FeaturesWoofer, 6.5 inches, Car Mount, Auxiliary, Active, 480 watts, 160 hertz

Questions about this item

How do I choose between the 480 W max and 140 W RMS ratings for my amplifier?

Match your amplifier to the 140 W RMS figure for continuous power; the 480 W max is a short-term peak rating.

What does the 140 W RMS rating mean once the speaker is installed in a door?

It means the driver can handle 140 watts of continuous power without overheating, thanks to the 1.5-inch high-temperature Kapton voice coil.

What does the 8-ohm impedance cap when wiring multiple speakers?

An 8-ohm load lets you wire two speakers in parallel for a 4-ohm total, which most car amplifiers support.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.