DRYROD 1205500 Portable Welding Oven 10 lb Capacity 300°F
Holds up to 10 lb of stick electrodes at 300 °F in a 10.5 lb steel case with fiberglass insulation and dual-voltage 60 W heating
- TypeWelding Parts & Supplies
- Keeps electrodes dry up to 300 °F maximum temperature
- Holds 10 lb of rods in 20 in deep chamber
- Runs on 100–240 V AC/DC dual-voltage 60 W elements
- Weighs only 10.5 lb with built-in handles for portability
- CE certified with 1 1/2 in fiberglass insulation for heat retention
Portable Welding Oven for Stick Electrodes
The DRYROD 1205500 is a portable electrode oven designed for stick welding (SMAW) processes. It holds up to 10 lb of electrodes with a maximum length of 18 in. The chamber measures 20 in deep by 3 in wide, suited for job-site storage and low-hydrogen rod preservation.
Plug-In Operation With Dual-Voltage Heating
Installation requires only a 100 to 240V AC/DC supply; the 60W dual-volt elements heat automatically. The unit weighs 10.5 lb and includes handles for carrying. No hard-wiring or external thermostat is needed, but the fixed 300°F set-point cannot be adjusted for different rod specifications.
300°F Maximum Temperature and 10 lb Capacity
The oven reaches a maximum operating temperature of 300 Degrees F with 1 1/2 in fiberglass insulation. This single temperature suits many low-hydrogen electrodes but excludes rods requiring higher holding temperatures. Buyers needing adjustable heat or larger batch capacity should consider other equipment.
Highlights
- Keeps electrodes dry up to 300 °F maximum temperature
- Holds 10 lb of rods in 20 in deep chamber
- Runs on 100–240 V AC/DC dual-voltage 60 W elements
- Weighs only 10.5 lb with built-in handles for portability
- CE certified with 1 1/2 in fiberglass insulation for heat retention
Specifications
| Type | Welding Parts & Supplies |
|---|---|
| Brand | DRYROD |
Questions about this item
How can I confirm the oven is maintaining the 300°F setting after I load it?
The unit reaches a maximum operating temperature of 300°F; use a calibrated thermocouple or infrared thermometer at the chamber to verify the internal temperature holds steady once the indicator light shows ready.
What comes in the box and what must I supply myself?
The portable oven ships as a complete unit with built-in handles and dual-voltage 60 W heating elements; you only need to provide a 100–240 V AC/DC power source and the electrodes you intend to dry.
Which capacity should I choose for 18 in stick electrodes?
The chamber depth is 20 in and the maximum electrode length supported is 18 in, so the 10 lb capacity model accommodates full-length rods without trimming.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
