We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black corrugated polyethylene tubing on a large spool, quarter-inch nominal size, thirty-two hundred feet total length

Drossbach

Drossbach Corrugated Tubing PE 1/4 in 3200 ft Black

SKU CH-5ZBF-2JMVC

Black polyethylene corrugated tubing, 1/4 in nominal size with 3,200 ft length for cable protection

  • TypeCable Management & Conduit
  • ColorBlack
  • 3,200 ft continuous length covers long cable runs
  • 1/4 in nominal size fits small-diameter wire bundles
  • Polyethylene construction resists chemicals and abrasion
  • Split corrugated design allows easy wire insertion
  • Operating range from -40 °F to 185 °F suits harsh environments

Corrugated PE Tubing 1/4 in 3200 ft

This black polyethylene conduit arrives in a 3,200 foot coil with a 1/4 inch nominal size. The fine-profile corrugation gives an inside diameter of 0.24 to 0.27 in and an outside diameter of 0.37 to 0.40 in. Wall thickness ranges from 0.01 to 0.07 in. It is designed for cable management and conduit applications.

Upgrade from basic loom or tape

The split corrugated design lets you insert cables without threading, saving time on long runs. Chemical resistance and a temperature range of -40 to 185 °F suit environments where simple spiral wrap or electrical tape would degrade. Abrasion resistance is rated good for industrial routing.

Fits standard 1/4 in cable bundles

The tubing accepts wire bundles that sit within the 0.24 to 0.27 in internal clearance. Black polyethylene blends into dark cabinets and outdoor trays. RoHS, REACH and NAFTA compliance removes regulatory friction for commercial installs. Self-extinguishing rating is not claimed, so verify local fire codes before specifying in plenum spaces.

Highlights

  • 3,200 ft continuous length covers long cable runs
  • 1/4 in nominal size fits small-diameter wire bundles
  • Polyethylene construction resists chemicals and abrasion
  • Split corrugated design allows easy wire insertion
  • Operating range from -40 °F to 185 °F suits harsh environments

Specifications

BrandDROSSBACH
TypeCable Management & Conduit
ColorBlack

Questions about this item

What size cable bundles will fit inside the 0.24 to 0.27 in inside diameter?

Bundles up to roughly 0.27 in diameter will fit; the tubing stretches slightly but the nominal 1/4 in size is fixed.

How do you route cables through the split corrugated wall without snagging?

Open the split along its length, lay cables in the channel, then press the edges together; forcing cables through the slit sideways tears the thin 0.01 to 0.07 in wall.

When should the tubing be replaced if it sees 185 °F heat regularly?

Polyethylene softens near 185 °F; inspect annually and replace once the corrugations flatten or the split no longer closes tightly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.