We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbide-tipped SDS Plus hammer drill bit, bright uncoated steel finish

Drill America

Drill America SDS Series Carbide-Tipped Hammer Drill Bit Uncoated Bright Finish collectible

SKU CH-2H49-AWQSD

Carbide-tipped SDS Plus hammer bit drills stone and concrete with a bright finish

  • Carbide tip resists wear on concrete
  • Uncoated bright finish suits many materials
  • SDS Plus shank fits rotary hammers
  • Spiral flutes eject chips when reversed
  • Steel shank adds toughness for stone drilling

Collectible Hammer Drill Bit

This Drill America SDS Series carbide-tipped hammer drill bit is listed as a new collectible within the sports memorabilia category. It features an uncoated bright finish and an SDS Plus shank designed for rotary hammer tools. The item appeals to enthusiasts who value vintage or specialised tooling as display pieces rather than for active job-site use. Its classification places it alongside sporting goods memorabilia rather than general hardware.

Display-Only Installation Notes

As a collectible, this bit is intended for shelf display or collection storage rather than installation into a power tool. No fitting procedure applies, and attempting to use it could damage the piece or void its collectible status. The carbide tip and steel shank remain in new condition, but the product is not warranted for drilling stone, concrete or any other material. Keep it in its original state to preserve its memorabilia value.

SDS Plus Shank Collectible Specification

The defining specification is the SDS Plus shank configuration combined with the uncoated bright finish on a carbide-tipped bit. This exact combination identifies the variant within the Drill America SDS Series and determines its place in a tool memorabilia collection. Buyers seeking a different shank type, a coated finish or a bit rated for active drilling should look elsewhere, as this listing represents this specific collectible configuration only.

Highlights

  • Carbide tip resists wear on concrete
  • Uncoated bright finish suits many materials
  • SDS Plus shank fits rotary hammers
  • Spiral flutes eject chips when reversed
  • Steel shank adds toughness for stone drilling

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the bit is drilling correctly after inserting it into my SDS Plus rotary hammer?

Run the tool counterclockwise briefly; the spiral flutes should pull dust up and out of the hole without clogging, and the carbide tip should cut cleanly into stone or concrete without excessive vibration.

What comes in the package and is any accessory required before first use?

The box contains the carbide-tipped SDS Plus hammer bit only; an SDS Plus rotary hammer is needed to drive it and is sold separately.

Which bit diameter and length should I choose for my anchor installation?

Match the bit diameter to the anchor’s specified drill size and pick a usable length that exceeds the anchor embedment depth plus the thickness of the material being fastened.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.