Drill America
Drill America DWC5-530-230 15/16 inch x 2 inch HSS annular cutter pneumatic accessory
Cuts a 15/16 inch diameter, 2 inch deep hole in metal using a magnetic drill press with a 3/4 inch Weldon shank
- 15/16 inch diameter cuts large holes cleanly
- 2 inch depth of cut handles thick material
- High-speed steel construction resists wear in general use
- 3/4 inch Weldon shank fits magnetic drill presses
- Pilot pin included for accurate hole alignment
15/16 inch annular cutter for magnetic drill press
This high-speed steel annular cutter measures 15/16 inch in diameter with a 2 inch depth of cut. It is designed for fast, efficient hole making in metal using a magnetic drill press. The cutter removes only the material at the hole perimeter to produce a quality hole. It is intended for professional metalworking and maintenance applications.
Weldon shank installation requires magnetic drill
The cutter features a 3/4 inch Weldon shank that fits directly into a compatible magnetic drill press. Installation is straightforward when the correct machine is used. Do not attempt to use this cutter with a standard hand drill or conventional drill press, as it will not secure properly and can cause damage or injury. A pilot pin is included to eject the slug and align the cut.
Verify magnetic drill press
Before ordering, confirm your magnetic drill press accepts a 3/4 inch Weldon shank. This cutter will not work with standard drill chucks, hand drills, or drill presses lacking the Weldon interface. Ensure the machine provides the required rigidity and coolant delivery for annular cutting. Check the cutter diameter and depth of cut match your hole requirements.
Highlights
- 15/16 inch diameter cuts large holes cleanly
- 2 inch depth of cut handles thick material
- High-speed steel construction resists wear in general use
- 3/4 inch Weldon shank fits magnetic drill presses
- Pilot pin included for accurate hole alignment
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
How do I verify the 15/16 inch annular cutter is cutting correctly after mounting it in the magnetic drill press?
The cutter should produce a clean, round hole with a solid slug ejected by the pilot pin, showing even chip formation and no excessive vibration during the cut.
What comes in the box with the DWC5-530-230 cutter and what must I supply separately?
The package includes the HSS annular cutter with its pilot pin; you must provide a magnetic drill press with a 3/4 inch Weldon shank holder and cutting fluid.
Which Drill America annular cutter size should I choose for a 15/16 inch diameter hole two inches deep?
Select the DWC5-530-230 model, which matches the 15/16 inch cutting diameter and two inch depth of cut specified for this application.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
