Drill America
Drill America DWC5-530-219 11/16" x 2" HSS Annular Cutter pneumatic accessory
A high-speed steel annular cutter with a 3/4" Weldon shank for magnetic drill press hole-making
- Cuts only the necessary material for fast, efficient hole making
- High-speed steel provides hardness and toughness for general-purpose wear resistance
- 3/4" Weldon shank fits magnetic drill presses for secure mounting
- Pilot pin included for accurate hole alignment and slug ejection
- Brand-new Drill America annular cutter ready for workshop use
Application and Compatibility
The Drill America DWC5-530-219 is an 11/16" high-speed steel annular cutter designed for magnetic drill presses with a 3/4" Weldon shank. It suits metalworkers who need fast, efficient hole making in structural steel or plate. It is not for buyers who want a cutter for standard hand drills or conventional drill presses. The tool cuts only the material necessary to produce a quality hole.
Capacity and Headroom
The cutter has a 2" depth of cut and an 11/16" diameter for single-pass holes in thick material. High-speed steel offers a combination of hardness and toughness for wear resistance in general purpose applications. It runs out when the work exceeds the 2" cutting depth or requires a diameter not matching 11/16". The pilot pin aligns the cutter and ejects the slug.
Thermals, Noise and Power Draw
High-speed steel construction manages heat during normal magnetic drilling operations without specialised cooling. The cutter produces typical machining noise levels for annular cutting in steel. Power draw depends entirely on the magnetic drill press used; the accessory itself adds no electrical load. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.
Highlights
- Cuts only the necessary material for fast, efficient hole making
- High-speed steel provides hardness and toughness for general-purpose wear resistance
- 3/4" Weldon shank fits magnetic drill presses for secure mounting
- Pilot pin included for accurate hole alignment and slug ejection
- Brand-new Drill America annular cutter ready for workshop use
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
Will the 11/16" annular cutter fit the 3/4" Weldon shank on my existing magnetic drill press?
Yes, the cutter uses a standard 3/4" Weldon shank compatible with magnetic drill presses that accept that fitting.
How can I verify the cutter is performing correctly after installing the pilot pin?
The cutter should produce a clean, burr-free hole with minimal vibration and eject the slug cleanly when the cut is complete.
Does the DWC5-530-219 package include the pilot pin or must I purchase it separately?
The product title lists the pilot pin, so it is included in the box with the annular cutter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
