Drill America
Drill America DWC5-530-136 1-1/16" X 1" HSS Annular Cutter with Pilot Pin pneumatic accessory
Cuts a 1-1/16 inch hole with a 1 inch depth using high-speed steel and includes a pilot pin for magnetic drill presses only
- Fast, efficient hole making with high-speed steel construction
- Cuts only necessary material for a quality hole
- Hardness and toughness combine for wear resistance
- 3/4" Weldon shank fits magnetic drill presses
- Includes pilot pin for accurate alignment
Drill America 1-1/16" Annular Cutter
This high-speed steel annular cutter creates a 1-1/16 inch diameter hole with a 1 inch depth of cut. It features a 3/4 inch Weldon shank designed exclusively for magnetic drill presses. The tool cuts only the perimeter material for efficient hole making in metal.
Suited for magnetic drill press operators
This accessory suits users with a magnetic drill press accepting a 3/4 inch Weldon shank who need fast, precise holes in steel. It is not for operators of standard hand drills, bench drill presses, or machines lacking the required shank interface.
Simple shank insertion, alignment critical
Installation requires inserting the Weldon shank into the magnetic drill press chuck and securing the included pilot pin for centering. The most common issue is attempting use in incompatible drills, which prevents proper seating and creates dangerous runout.
Highlights
- Fast, efficient hole making with high-speed steel construction
- Cuts only necessary material for a quality hole
- Hardness and toughness combine for wear resistance
- 3/4" Weldon shank fits magnetic drill presses
- Includes pilot pin for accurate alignment
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What magnetic drill press shank size does the DWC5-530-136 cutter require?
The cutter has a 3/4" Weldon Shank and must be used with a magnetic drill press that accepts this shank size.
Can I run this annular cutter in a standard hand drill or benchtop drill press?
No, the manufacturer states it is for magnetic drill press only and should not be used with a standard hand drill or drill press.
How do I know the cutter is performing correctly once installed?
It should produce a clean hole by cutting only the material at the perimeter, leaving a solid slug, which indicates proper high-speed steel annular cutting action.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
