Drill America
Drill America DWC5-530-121 annular cutter 3/4" x 1" HSS with pilot pin
High-speed steel annular cutter DWC5-530-121 with 3/4" Weldon shank and pilot pin for magnetic drill press use
- High-speed steel cuts fast with wear resistance
- Cuts only needed material for efficient hole making
- 3/4" Weldon shank fits magnetic drill presses
- Includes pilot pin for accurate cutter alignment
- California Proposition 65 warnings for cancer and reproductive harm
Drill America DWC5-530-121 Annular Cutter
This high-speed steel annular cutter measures 3/4 inch by 1 inch and includes a pilot pin. It features a 3/4 inch Weldon shank designed exclusively for magnetic drill presses. The tool cuts only the material needed to form a clean hole, reducing waste and cutting time in metalworking tasks.
Suited for mag-drill operators, not hand-drill users
Fabricators and maintenance crews using magnetic drill presses will appreciate the fast, efficient hole-making capability. The Weldon shank prevents use with standard hand drills or conventional drill presses, so buyers without a mag-drill setup should look for a different shank style.
Pilot pin and Prop 65 notice
The included pilot pin centers the cutter and ejects the slug, streamlining repetitive drilling workflows. A California Proposition 65 warning indicates the product contains a chemical known to the state to cause cancer and birth defects or other reproductive harm, so appropriate handling precautions apply.
Highlights
- High-speed steel cuts fast with wear resistance
- Cuts only needed material for efficient hole making
- 3/4" Weldon shank fits magnetic drill presses
- Includes pilot pin for accurate cutter alignment
- California Proposition 65 warnings for cancer and reproductive harm
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What magnetic drill press accepts the 3/4" Weldon Shank on this cutter?
Any magnetic drill press with a 3/4" Weldon Shank holder will accept the cutter; standard hand drills and conventional drill presses will not.
Can the included pilot pin be used with older magnetic drill presses that have a different pin diameter?
The supplied pilot pin matches the cutter's 1" depth of cut and is intended for the Weldon Shank interface; compatibility with other pin sizes is not guaranteed.
How do I confirm the cutter is producing a clean annular hole after the first pass?
A correctly operating cutter leaves a solid slug and a smooth hole wall; if the slug remains intact and the hole diameter matches the 3/4" size, the tool is working as intended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
