Drill America
Drill America ANC5-530-345 1-1/4" X 3" nACo Coated Blue pneumatic accessory
nACo Nano-Composite coating extends tool life up to 30% while cutting steel, cast iron and stainless steels with a 3/4" Weldon shank for magnetic drill presses
- nACo Nano-Composite coating extends tool life up to 30%
- Cuts steel, cast iron, heated and stainless steels efficiently
- nACo Nano Coating protects against wear and high heat
- M2 High Speed Steel removes only necessary material for quality holes
- 3/4" Weldon Shank fits most magnetic drill presses
1-1/4" nACo Coated Cutter
The Drill America ANC5-530-345 is a 1-1/4" x 3" annular cutter with a blue nACo nano-composite coating. It is designed for magnetic drill presses using a 3/4" Weldon shank. The M2 high-speed steel construction cuts only the necessary material for efficient hole making in steel, cast iron, and stainless steels. A pilot pin is included for alignment.
Sustained cutting performance
The nACo nano-coating provides extra protection against tool wear and high heat during prolonged operation. This coating increases tool life up to 30% compared to traditional HSS annular cutters under similar conditions. It maintains cutting efficiency when processing difficult materials including heated steels. The design reduces the volume of material removed, lowering sustained load on the machine.
Magnetic drill press exclusivity
This accessory fits most magnetic drill presses via its 3/4" Weldon shank but cannot be used with standard hand drills or conventional drill presses. The geometry and shank style require the rigid alignment and feed control of a mag drill. Buyers needing a cutter for portable hand-held drilling must select a different tool type. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- nACo Nano-Composite coating extends tool life up to 30%
- Cuts steel, cast iron, heated and stainless steels efficiently
- nACo Nano Coating protects against wear and high heat
- M2 High Speed Steel removes only necessary material for quality holes
- 3/4" Weldon Shank fits most magnetic drill presses
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
How much heat does the nACo Nano-Composite coating handle during all-day cutting?
The nACo Nano Coating provides extra protection against high heat, increasing tool life up to 30% compared to traditional HSS annular cutters.
What shank size must my magnetic drill press accept for this cutter to fit?
This cutter has a 3/4" Weldon Shank that fits most magnetic drill presses, also called mag drills.
Will this annular cutter work with the standard drill press I already own?
No, it is for use with a magnetic drill press only and must not be used with a standard hand drill or drill press.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
