Drill America
Drill America ANC5-530-263 1-5/8" X 2" nACo Coated Blue pneumatic accessory
nACo coated annular cutter extends tool life 30% when cutting steel, cast iron and stainless steel in magnetic drill presses
- nACo Nano-Composite coating extends cutter life by up to 30% over standard HSS annular cutters
- Cuts steel, cast iron, heated and stainless steels for versatile material handling
- M2 high-speed steel removes only necessary material for fast, efficient hole making
- 3/4" Weldon shank fits most magnetic drill presses for secure mounting
- Includes pilot pin for accurate centering and immediate use
Drill America nACo Annular Cutter
The Drill America ANC5-530-263 is a 1-5/8" x 2" annular cutter built for magnetic drill presses. Its nACo Nano-Composite coating targets professionals cutting steel, cast iron, heated steel and stainless steel. The tool removes only the hole perimeter for fast material removal. It is not suited for standard hand drills or conventional drill presses.
3/4" Weldon Shank & Pilot Pin
A 3/4" Weldon shank locks into most magnetic drill presses for secure, centred alignment. The supplied pilot pin centres the cut and ejects the slug after drilling. The coating resists wear and high heat during prolonged use. California Proposition 65 warnings apply for cancer and reproductive harm.
Magnetic Drill Press Only
This cutter is designed exclusively for magnetic drill presses and will not function in handheld or bench-top machines. The nACo coating extends tool life up to 30% versus uncoated high-speed steel under comparable conditions. Buyers needing different diameters or shank styles must select a separate part number.
Highlights
- nACo Nano-Composite coating extends cutter life by up to 30% over standard HSS annular cutters
- Cuts steel, cast iron, heated and stainless steels for versatile material handling
- M2 high-speed steel removes only necessary material for fast, efficient hole making
- 3/4" Weldon shank fits most magnetic drill presses for secure mounting
- Includes pilot pin for accurate centering and immediate use
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What does the nACo Nano-Composite coating do for the 1-5/8" X 2" cutter?
The nACo Nano-Composite Blue coating increases tool life up to 30% compared to traditional HSS annular cutters and provides extra protection against tool wear and high heat when cutting steel, cast iron, heated and stainless steels.
What shank size does this annular cutter use and what equipment does it fit?
It uses a 3/4" Weldon Shank that fits most magnetic drill presses, also called magnetic drills or mag drills, and is for use with magnetic drill press only.
How is the pilot pin used during installation and what common mistake should be avoided?
The cutter comes with a pilot pin that must be inserted before use; do not use this accessory with a standard hand drill or drill press as it is designed for magnetic drill presses only.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
