Drill America
Drill America ANC5-530-236 1-1/16" X 2" nACo Blue pneumatic accessory
A nACo Nano-Composite coated annular cutter increases tool life up to 30% and cuts steel, cast iron and stainless steels with a 3/4" Weldon shank for magnetic drill presses
- nACo coating extends tool life by 30% over standard HSS cutters
- Cuts steel, cast iron and stainless in magnetic drill presses
- M2 high-speed steel removes only needed material for fast holes
- 3/4" Weldon shank fits most mag drills directly
- Includes pilot pin for accurate hole starting
Drill America nACo Coated Annular Cutter
The Drill America ANC5-530-236 is a nano-composite coated blue annular cutter built for magnetic drill presses. It targets metalworkers who need fast, efficient hole making in tough alloys. The m2 high-speed steel body removes only the necessary material. This accessory is not for operators using standard hand drills or conventional drill presses.
1-1/16 Inch Cutting Diameter
The single specification that decides fit is the 1-1/16 inch cutting diameter paired with a 2 inch depth of cut. The 3/4 inch Weldon shank matches most magnetic drill presses. The nACo nano-composite coating increases tool life up to 30 percent compared to traditional HSS annular cutters. Buyers needing a different hole diameter must select another size.
Pilot Pin Included For Alignment
Installation is straightforward: insert the supplied pilot pin, engage the Weldon shank in the mag drill, and align the tip. The cutter is designed for magnetic drill presses only; using it in a hand drill or standard press will damage the tool. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- nACo coating extends tool life by 30% over standard HSS cutters
- Cuts steel, cast iron and stainless in magnetic drill presses
- M2 high-speed steel removes only needed material for fast holes
- 3/4" Weldon shank fits most mag drills directly
- Includes pilot pin for accurate hole starting
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
How much longer does the nACo coating extend cutter life in actual use?
The nano-composite blue coating increases tool life up to 30% compared to traditional HSS annular cutters by reducing wear and heat buildup.
What does the 3/4" Weldon shank limit me to?
It fits most magnetic drill presses and restricts use to mag drills only; it will not work in a standard hand drill or conventional drill press.
What physical space does the 1-1/16" diameter by 2" length require on the mag drill?
The cutter needs a mag drill with at least 2" of cutting depth clearance and a 3/4" Weldon arbor; the included pilot pin seats in the centre hole for alignment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
