Drill America
Drill America ANC5-530-181 2" X 1" nACo Nano-Composite Blue Annular pneumatic accessory
A nano-composite coated annular cutter that extends tool life by 30% while cutting steel, cast iron and stainless steel on magnetic drill presses
- nACo Nano-Composite coating extends tool life up to 30% over standard HSS cutters
- Cuts tough steels, cast iron and stainless efficiently with M2 high-speed steel
- 3/4" Weldon shank fits most magnetic drill presses for quick setup
- Pilot pin included for accurate hole centring and easy slug ejection
- California Proposition 65 warning: contains chemicals linked to cancer and reproductive harm
Drill America nACo Nano-Composite Cutter
The Drill America ANC5-530-181 is a 2" X 1" annular cutter with a blue nACo Nano-Composite coating. It is built from M2 High Speed Steel and designed for magnetic drill presses. The 3/4" Weldon Shank fits most mag drills. A pilot pin is included for accurate hole alignment.
Metalworkers needing extended cutter life
This accessory suits operators cutting steel, cast iron, heated steel and stainless steel where heat and wear reduce standard tool life. The coating increases tool life up to 30% compared to traditional HSS annular cutters. It is not for users without a magnetic drill press; do not use with a standard hand drill or drill press. Buyers needing a different shank size or cutting diameter should look elsewhere.
2-inch diameter cutting capacity
The cutter removes only necessary material for fast, efficient hole making in difficult alloys. The nACo Nano Coating provides extra protection against high heat during prolonged cuts. Headroom ends at the 1-inch depth of cut and the fixed 3/4" Weldon Shank interface. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- nACo Nano-Composite coating extends tool life up to 30% over standard HSS cutters
- Cuts tough steels, cast iron and stainless efficiently with M2 high-speed steel
- 3/4" Weldon shank fits most magnetic drill presses for quick setup
- Pilot pin included for accurate hole centring and easy slug ejection
- California Proposition 65 warning: contains chemicals linked to cancer and reproductive harm
Specifications
| Brand | DRILL AMERICA |
|---|
Questions about this item
What shank size does my magnetic drill press need to accept this annular cutter?
The cutter has a 3/4" Weldon shank, which fits most magnetic drill presses.
Can I keep using my standard hand drill with this cutter for occasional holes?
No, the cutter is designed for magnetic drill presses only and must not be used with a standard hand drill or drill press.
How will I know the nACo Nano-Composite coating is performing during the first cuts?
Expect faster, cleaner hole making with less wear and heat buildup, as the coating increases tool life up to 30% over traditional HSS cutters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
