Drill America
Drill America 1-3/16in HSS 1/2in Shank KFD Drill Bit with 3-Flat pneumatic accessory
A 1-3/16 inch high-speed steel drill bit with a 1/2 inch reduced shank, three-flat grip and heavy-duty split point for secure pneumatic drilling
- TypeDrill Accessories
- Large 1-3/16 inch hole capacity
- High-speed steel withstands heavy use
- Split point reduces walking on contact
- Three-flat shank prevents slippage in chuck
1-3/16in HSS Drill Bit with 3-Flat Shank
This Drill America bit is a high-speed steel accessory built for heavy-duty drilling tasks. It features a 1/2in reduced shank with three flats to prevent slipping in the chuck. The split-point design helps the bit start on contact and reduces walking. Overall length measures 6in with a 3in flute length.
Suits large-hole drilling in metal.
This bit suits users drilling 1-3/16in holes in metal stock using a 1/2in capacity chuck. The decimal equivalent is 1.1875in. It is not for jobs requiring smaller diameters, longer reach, or different shank configurations. Builders needing other sizes should look at different bits.
Highlights
- Large 1-3/16 inch hole capacity
- High-speed steel withstands heavy use
- Split point reduces walking on contact
- Three-flat shank prevents slippage in chuck
Specifications
| Brand | Drill America |
|---|---|
| Type | Drill Accessories |
Questions about this item
What size drill chuck is required for the 1/2in shank on this bit?
The bit uses a 1/2in reduced shank with three flats, so it fits any drill chuck that accepts a 1/2in shank diameter.
How do you seat the 3-flat shank correctly in a keyed chuck to prevent slipping?
Tighten each jaw onto one of the three flats rather than the rounded portions, then re-check alignment before drilling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
