We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 304 stainless steel gas tubing kit with brass and steel fittings, 18 in length

DORMONT

DORMONT T4-KIT-18 Gas Tube Kit 1/4 in 18 in 25000 BTU

SKU CH-M2VT-CE8YZ MPN T4-KIT-18

Connects gas appliances with an 18-inch 304 stainless steel hose rated for 25,000 BTU and .5 psi at 70°F

  • TypeDrain Components
  • Delivers 25000 BTU for reliable gas flow
  • 18 in length suits tight installation spaces
  • 304 stainless steel tube resists corrosion and heat
  • Certified to ANSI Z 21.15 and CSA 9.1 standards
  • Operates from -40 to 350 degrees Fahrenheit

Gas Tubing Kit for Low-Pressure Appliances

This kit provides a flexible 18-inch stainless-steel hose rated for 25,000 BTU and a maximum working pressure of .5 psi at 70 degrees F. It suits residential or light-commercial gas appliances that require a short, code-compliant connector.

Included Fittings and Certified Standards

One end carries a male NPT fitting in 304 stainless steel, the other a female NPT fitting in brass, so no extra adapters are needed for typical appliance stub-outs. The assembly meets ANSI Z21.15, Z21.18, Z21.24, Z21.41, Z21.69, Z21.90, ANSI/UL 567 and CSA 6.16, 6.24, 6.9, 6.3 requirements.

Straightforward Threaded Installation

Both ends thread directly onto standard NPT ports; hand-tighten then finish with a wrench to avoid cross-threading the brass nut. The 18-inch length limits routing options in tight cabinets, and the fixed .5 psi rating means the kit cannot serve higher-pressure distribution lines.

Highlights

  • Delivers 25000 BTU for reliable gas flow
  • 18 in length suits tight installation spaces
  • 304 stainless steel tube resists corrosion and heat
  • Certified to ANSI Z 21.15 and CSA 9.1 standards
  • Operates from -40 to 350 degrees Fahrenheit

Specifications

TypeDrain Components
BrandDormont
ModelT4-KIT-18

Questions about this item

Will the 304 stainless-steel tubing need periodic replacement?

The 304 stainless-steel hose and fittings are rated for -40 to 350 °F and 0.5 psi at 70 °F; under normal gas service they do not have a scheduled replacement interval.

What limits continuous use at the 25000 BTU rating?

The 0.5 psi maximum working pressure at 70 °F is the first constraint; sustained flow must stay within that pressure and the -40 to 350 °F temperature range.

Does the kit generate noticeable heat or noise during all-day operation?

The passive stainless-steel and brass construction has no moving parts, so it produces no noise and negligible heat beyond the gas temperature itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.