We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow corrugated stainless steel gas connector hose with brass fittings, 36 inches long

DORMONT

DORMONT 10C-3132-36 Gas Connector Trap 3/8 x 36 in 33,400 BTU

SKU CH-6JN1-CGZMH MPN 10C-3132-36

A 36-inch stainless-steel gas connector rated for 33,400 BTU and certified to ANSI and CSA standards

  • TypeDrain Components
  • Reliable gas flow with 33,400 BTU capacity
  • Durable 304 stainless steel hose and fittings
  • Safe operation from -40 to 350 degrees F
  • Meets ANSI Z 21.15 and CSA 9.1 standards
  • Flexible 36-inch length for easy installation

36-Inch Stainless Gas Connector

The Dormont 10C-3132-36 is a 36-inch flexible gas connector built from 304 stainless steel hose and fittings. It carries a 33,400 BTU capacity and is rated for a maximum working pressure of .5 psi at 70 °F. The yellow-coated assembly suits residential and light-commercial gas appliance hook-ups.

Replaces Worn Or Undersized Connectors

Swap out cracked, corroded or too-short connectors when the existing hose cannot reach the appliance or shows signs of fatigue. The jump is worth it when local code demands ANSI Z21.15, Z21.18, Z21.24, Z21.41, Z21.69 or Z21.90 compliance, or when the system operates between -40 °F and 350 °F.

Simple Threaded Installation

The MNPT fitting threads directly onto standard gas pipe; no special tools beyond a wrench and approved thread sealant are required. Common issues include over-tightening the stainless fitting, which can distort threads, and using the wrong sealant, which may degrade at 350 °F. Always pressure-test at .5 psi after assembly.

Highlights

  • Reliable gas flow with 33,400 BTU capacity
  • Durable 304 stainless steel hose and fittings
  • Safe operation from -40 to 350 degrees F
  • Meets ANSI Z 21.15 and CSA 9.1 standards
  • Flexible 36-inch length for easy installation

Specifications

TypeDrain Components
BrandDormont
Model10C-3132-36

Questions about this item

What length and fitting type does the 10C-3132-36 need for a gas line connection?

The connector is 36 inches long with a 3/8 inch outside diameter hose and an MNPT fitting on one end, both made of 304 stainless steel.

How do you install the Dormont 10C-3132-36 without damaging the stainless steel fittings?

Thread the MNPT fitting by hand first, then tighten with a wrench on the fitting flats only — do not clamp the flexible hose or over-torque the 304 stainless steel threads.

When should the yellow 304 stainless steel gas connector be inspected or replaced?

Inspect annually for kinks, corrosion or cracks in the yellow coating; replace immediately if the hose shows any damage or after any incident that exceeds the 0.5 psi working pressure at 70 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.