diymore 1800W Digital Thermostat Outlet 12-Pack White -104°F to 210°F
A 12-pack of digital thermostat outlets controlling heating or cooling devices up to 1800W across a -104°F to 210°F range
- TypeDigital temperature driver, Digital, Push Button
- Size/Dimensions6 in x 3 in x 3 in
- ColorWhite
- Mount TypeWall Mount
- Relay Contact1800W digital temperature controller
- Item Count12 pack
- Precise control across -104°F to 210°F range protects plants and pets
- Automatic heating and cooling modes maintain stable conditions year-round
- 1800W capacity runs large appliances with built-in safety protection
- Simple 4-button interface sets target temperature in minutes
- 6-foot probe cord and standard outlet design fit any location
12-Pack Digital Thermostat Outlets
This 12-pack provides twelve plug-in digital thermostat outlets for controlling heating and cooling devices. Each unit accepts standard 120V appliances up to 1800W. The bundle suits greenhouse operators, reptile keepers, fermentation enthusiasts, or pool managers needing multiple independent control points.
Sustained 1800W Relay Operation
The internal relay is rated for continuous 1800W loads, allowing heaters, pumps, or fans to run for extended periods without derating. Digital control logic maintains the setpoint by cycling the relay as needed. The 6-foot probe cord positions the sensor away from the outlet heat for stable long-term readings.
15-Amp Circuit Constraint
Each outlet draws power from a single 120V receptacle protected by a typical 15-amp branch circuit, so the 1800W rating uses the full circuit capacity. Running multiple units on one circuit will trip the breaker. The -104°F to 210°F range covers extreme environments but the enclosure is rated for indoor use only.
Highlights
- Precise control across -104°F to 210°F range protects plants and pets
- Automatic heating and cooling modes maintain stable conditions year-round
- 1800W capacity runs large appliances with built-in safety protection
- Simple 4-button interface sets target temperature in minutes
- 6-foot probe cord and standard outlet design fit any location
Specifications
| Type | Digital temperature driver, Digital, Push Button |
|---|---|
| Brand | diymore, Diymore |
| Size/Dimensions | 6 in x 3 in x 3 in |
| Color | White |
| Mount Type | Wall Mount |
| Relay Contact | 1800W digital temperature controller |
| Item Count | 12 pack |
| Selling Unit | 1, Digital temperature driver |
| Features | Accurate temperature, Thermostat socket, diymore |
| Part Number | A1_KABB0006-014_US |
Questions about this item
How much heat does the 1800W relay generate when the outlet runs continuously?
The digital controller draws minimal power for its display and logic; nearly all 1800W passes through to the connected appliance, so the unit itself stays cool.
What plug type and circuit amperage must the wall socket already provide?
It requires a standard 120V North American outlet on a 15-amp circuit to deliver the full 1800W rating safely.
Will the 6-foot probe cord reach my existing greenhouse heater without an extension?
The probe cable measures 6 feet; if the heater is farther away you will need a longer probe or a different mounting position.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
