DIVI
DIVI 8 Pin GPU Female to Dual 8(6+2) Pin Male Splitter Cable 9-inch
Splits one 8-pin GPU power connector into two 8(6+2)-pin male plugs, 23 cm long with 18 AWG copper cores
- TypeSatellite Receiving
- Supplies two graphics cards from one 8-pin PSU connector
- Genuine new copper cores with no recycled materials used
- 18 AWG wiring rated to UL 1007 safety standard
- 9-inch (23 cm) length keeps cable routing tidy
- Compatible with 6-pin and 8-pin Radeon graphics cards
Power Delivery
This 9-inch splitter cable converts a single 8-pin GPU female connector into two 8(6+2)-pin male plugs, letting one PSU lead feed two graphics cards or a card that needs dual power inputs. It is built for desktop builders upgrading a system that lacks enough native PCIe power connectors.
Connector Compatibility
The female end mates with the PSU's 8-pin PCIe output while each male end splits into a 6+2 arrangement that fits both 6-pin and 8-pin graphics card sockets from brands including Radeon, ASUS, ASRock, EVGA, Sapphire and Gigabyte. It cannot power motherboards because it is not an EPS 8-pin cable.
Installation Notes
The 18AWG copper conductors with UL 1007 insulation are pre-sleeved, so the cable routes cleanly inside a case without extra sleeving work. Ensure the PSU rail can supply the combined draw of both attached cards; the splitter itself adds no active components.
Highlights
- Supplies two graphics cards from one 8-pin PSU connector
- Genuine new copper cores with no recycled materials used
- 18 AWG wiring rated to UL 1007 safety standard
- 9-inch (23 cm) length keeps cable routing tidy
- Compatible with 6-pin and 8-pin Radeon graphics cards
Specifications
| Type | Satellite Receiving |
|---|
Questions about this item
How much power can the 18 AWG wires carry once the splitter is installed in a PC?
The 18 AWG conductors are rated to UL 1007 and deliver up to 100 percent of the PCIe 8-pin specification without voltage drop at the 23 cm length.
What does the PCIe 8(6+2) pin interface cap in practice for this splitter?
Each male end fits both 6-pin and 8-pin graphics card sockets, so the splitter is limited to the standard PCIe 8-pin power envelope.
What clearance does the 9-inch cable need to fit inside a case?
The 23 cm sleeved assembly requires only enough room for the female plug at the PSU and two male plugs at the GPU, with no bulky connectors to obstruct airflow.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



