We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC float switch with wire leads

Diversitech Corp.

Diversitech Corp. CC-1 Condensation Pan Switch NC 24VDC Wire

SKU CH-29EA-FH2SA

In-pan float switch detects condensate levels and interrupts 24 VDC circuits at 1.5 A with a 6 ft wire lead

  • Float switch protects equipment from overflow
  • 6 ft wire lead allows flexible installation
  • 5 A rating suits standard condensate pumps
  • PVC housing resists corrosion in wet environments
  • 24 VDC operation matches common control circuits

In-Pan Condensation Switch for Condensate Removal

The Diversitech CC-1 is an in-pan float switch designed to activate condensate removal pumps. It mounts directly inside the drain pan and uses a PVC housing to resist corrosion. The switch operates on a 24 VDC control circuit and includes a 6 ft wire lead for connection.

Normally Closed 1.5 A Contact Rating

This model provides a normally closed contact rated at 1.5 A at 24 VDC. The float mechanism opens the circuit when the water level rises, signalling the pump to start. The electrical rating determines compatibility with the pump control board, so verify the coil current before installation.

Suits HVAC Techs Wiring Standard 24 V Controls

Technicians installing or servicing condensate pumps with 24 VDC control circuits will find this switch a direct fit. It is not suitable for line-voltage switching or high-current pump motors exceeding the 1.5 A rating. Builders needing a normally open contact or a different voltage should select an alternative model.

Highlights

  • Float switch protects equipment from overflow
  • 6 ft wire lead allows flexible installation
  • 5 A rating suits standard condensate pumps
  • PVC housing resists corrosion in wet environments
  • 24 VDC operation matches common control circuits

Specifications

BrandDIVERSITECH

Questions about this item

How does the 1.5 A rating work when the switch is installed in a condensate pan?

The float switch carries up to 1.5 amps at 24 VDC, so it can directly control a small condensate pump or alarm circuit without a separate relay.

What does the 24 VDC designation mean for wiring the switch?

The switch is designed for 24 VDC control circuits; connect the 6 ft wire leads to a compatible 24 VDC pump or controller — it is not rated for line voltage.

What mounting arrangement does the in-pan design require?

The switch sits inside the condensate pan and uses its integral float; no external bracket or separate mounting hardware is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.