We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular 3.5 inch low-profile Sata hard drive module

DELL

DELL U4001 160Gb 7200Rpm Sata 3.5Inch Low Profile 1.0Inch switch module

SKU CH-5VMP-P94A1

A 160 GB SATA hard drive spinning at 7200 RPM in a low-profile 3.5-inch form factor just 1.0 inch high

  • Low-profile 1.0 inch height fits tight bays
  • 160 GB capacity stores essential data
  • 7200 RPM spindle speed speeds up access
  • SATA interface connects to standard controllers

Dell U4001 low-profile drive

The Dell U4001 is a 160Gb Sata hard disk drive built in a 3.5inch form factor with a 1.0inch low-profile height. It suits servers or storage arrays where drive bay clearance is limited and a modest capacity is sufficient. The 7200Rpm spindle and 8Mb buffer provide baseline throughput for archival or secondary data workloads. Buyers needing larger capacities or faster interfaces should consider other models.

Thermals and power draw

The low-profile 1.0inch chassis allows airflow in dense enclosures while the drive operates at 7200Rpm over a standard Sata link. Typical acoustic output is consistent with desktop-class mechanical drives under normal access patterns. Power consumption scales with the 5.1 specification during sequential and random operations. No active cooling beyond chassis airflow is required.

Highlights

  • Low-profile 1.0 inch height fits tight bays
  • 160 GB capacity stores essential data
  • 7200 RPM spindle speed speeds up access
  • SATA interface connects to standard controllers

Specifications

BrandDELL

Questions about this item

How do I install the DELL U4001 3.5-inch low-profile drive in a 1.0-inch bay?

Slide the drive into the 1.0-inch low-profile bay, connect the 7-pin Sata data cable and the Sata power connector, then secure it with the chassis screws.

What maintenance will the 160Gb 7200Rpm Sata drive need over time?

No routine maintenance is required; monitor SMART health data and replace the drive if reallocated sectors or seek errors appear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.