DELL
DELL LA-L244P Inspiron 15 3510 Motherboard NCXC4
Replacement motherboard for Dell Inspiron 15 3510 with Intel Celeron N4020 or Pentium N5030 processor, one DDR4 2400 MHz SoDIMM slot supporting up to 8 GB.
- Direct replacement for Inspiron 15 3510
- Supports Intel Celeron N4020 and Pentium N5030
- One SoDIMM slot accepts DDR4 2400 MHz memory
- Fits 2.5-inch SATA drive and M.2 2230 or 2280 NVMe SSD
- Integrated Intel UHD Graphics for everyday display output
Dell Inspiron 15 3510 motherboard
This new laptop motherboard fits the Dell Inspiron 15 3510 chassis and ships with an Intel Celeron N4020 or Pentium N5030 processor soldered in place. It provides one DDR4 SoDIMM slot running at 2400 MHz and supports up to 8 GB of system memory. Integrated Intel UHD Graphics handle display output.
Suits owners replacing a failed board
Repair technicians and DIY owners restoring a 3510 unit will find the correct mounting points and connector layout. Builders wanting a different CPU, more than one memory slot, or discrete graphics cannot use this board because the processor is fixed and expansion is limited to the integrated chipset.
Fits existing 3510 chassis and cooling
The board reuses the original heat-sink assembly, keyboard ribbon, display cable and battery connector without modification. One SoDIMM slot leaves the second channel unused, while the 2.5-inch SATA bay and M.2 2230 or 2280 NVMe slots remain available for storage upgrades.
Highlights
- Direct replacement for Inspiron 15 3510
- Supports Intel Celeron N4020 and Pentium N5030
- One SoDIMM slot accepts DDR4 2400 MHz memory
- Fits 2.5-inch SATA drive and M.2 2230 or 2280 NVMe SSD
- Integrated Intel UHD Graphics for everyday display output
Specifications
| Model | Inspiron 15 3510 |
|---|
Questions about this item
Does this LA-L244P board need a separate processor or is the Intel Pentium N5030 Celeron N4020 already on it?
The Intel Pentium N5030 Celeron N4020 is soldered to the board, so no separate CPU is required.
Can I keep my existing 2.5-inch 5400 RPM SATA hard drive and add an M.2 2280 NVMe drive at the same time?
Yes, the board provides both a 2.5-inch SATA bay and an M.2 2280 PCIe NVMe slot, so both drives can be installed together.
After fitting the board, how do I confirm the single DDR4 2400 MHz SoDIMM slot is recognised?
Enter the system BIOS or use the operating system memory information screen; it will show the installed capacity up to 8 GB and the 2400 MHz speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



