We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell HN10N Broadcom 57810S dual port 10Gb BASE-T PCIe x8 network card

DELL

DELL HN10N Broadcom 57810S Dual Port 10Gb BASE-T network card

SKU CH-4R4V-8F90Q

Dual-port 10Gb BASE-T adapter with Broadcom 57810S controller for PCI Express x8 slots

  • Dual 10 Gbps Ethernet ports for high-throughput networking
  • PCI Express x8 interface fits modern server motherboards
  • Broadcom 57810S controller delivers reliable wired connectivity
  • RJ-45 BASE-T ports use familiar copper cabling
  • Converged adapter design supports multiple traffic types

Dell HN10N 10Gb BASE-T adapter

The Dell HN10N is a dual-port 10Gb BASE-T network card built on the Broadcom 57810S controller. It connects through a PCI Express x8 slot and presents two standard RJ-45 Ethernet ports. The card targets servers or workstations that need 10-gigabit copper links without switching to fibre.

Sustained 10Gbps throughput on copper

The Broadcom 57810S controller is designed for continuous 10Gbps operation across both ports. Hardware offloads for TCP/IP checksum, segmentation and receive-side scaling keep CPU utilisation low during long transfers. BASE-T signalling negotiates down to lower speeds automatically when the link partner requires it.

Check PCIe x8 slot and CAT6a cabling

Verify the host has a free PCI Express x8 slot with enough bracket clearance for a low-profile card. Each 10Gb link demands Category 6a or better twisted-pair cable runs up to the rated distance. Ensure the operating system includes or can load a driver for the 57810S controller.

Highlights

  • Dual 10 Gbps Ethernet ports for high-throughput networking
  • PCI Express x8 interface fits modern server motherboards
  • Broadcom 57810S controller delivers reliable wired connectivity
  • RJ-45 BASE-T ports use familiar copper cabling
  • Converged adapter design supports multiple traffic types

Specifications

No published specifications for this item yet.

Questions about this item

How much heat and power does the Broadcom 57810S dual-port 10Gb BASE-T adapter add when it runs continuously?

The card draws power from the PCI Express x8 slot and uses a passive heatsink, so it adds minimal heat without a fan.

What slot and cabling must already be in the server for this HN10N card to operate?

You need a free PCI Express x8 slot and Cat6a or better RJ-45 cables to reach 10 Gbps speeds.

Will the 57810S adapter work in an older platform that only has PCI Express 2.0 x8 slots?

Yes, the card is backward compatible with PCI Express 2.0 x8, though bandwidth will be limited to the slot's 5 GT/s rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.