We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular DMD DLP chip on a green circuit board with silver connectors

DELL

DELL DMD DLP Chip 1076-6328W 1076-6329W Projector Accessory

SKU CH-3CFC-K8XF4

Replacement DMD DLP chip for projectors using part numbers 1076-6328W or 1076-6329W, tested for clear imaging

  • TypeOthers
  • Genuine Dell replacement restores projector image quality
  • Compatible with part numbers 1076-6328W and 1076-6329W
  • Replaces earlier 6318W and 6319W DMD chips
  • Tested at least three times for zero dead pixels
  • New condition ensures reliable long-term performance

Genuine DMD DLP replacement chip

This genuine DELL DMD DLP chip carries part numbers 1076-6328W and 1076-6329W. It replaces the earlier 6318W and 6319W components in compatible projectors. Each unit is tested at least three times to ensure a clear image with no dead pixels. It is sold new for technicians and owners repairing a faulty light engine.

Tested for zero dead pixels

The supplier confirms extensive testing so the chip projects a clean image without stuck or dead pixels. As a bare semiconductor component, it has no external connectors; installation requires disassembling the projector and reseating the device on the DMD board. Proper anti-static handling and clean-room practices are essential to avoid contaminating the optical path.

Verify projector compatibility first

Confirm that your projector service manual lists the 1076-6328W or 1076-6329W as the correct DMD part before ordering. The chip does not fit models that specify a different DMD part number. Buyers who need a complete light-engine assembly or a different DMD specification cannot use this component.

Highlights

  • Genuine Dell replacement restores projector image quality
  • Compatible with part numbers 1076-6328W and 1076-6329W
  • Replaces earlier 6318W and 6319W DMD chips
  • Tested at least three times for zero dead pixels
  • New condition ensures reliable long-term performance

Specifications

TypeOthers

Questions about this item

Which DLP chip part numbers does the 1076-6328W or 1076-6329W replace?

This chip replaces Dell part numbers 6318W and 6319W, matching the 1076-6328W and 1076-6329W designations used in compatible projector models.

What physical dimensions and connector layout does the 1076-6328W DMD chip require for installation?

The chip is a direct-fit DMD device designed for the projector's existing optical block; it uses the original connector and mounting points with no adapter needed.

What is the correct installation sequence for the 1076-6329W chip, and which step is most often missed?

Remove the old chip, clean the optical surface, seat the new 1076-6329W precisely in the carrier, then reconnect the flex cable; the step most often missed is reseating the cable fully before reassembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.