DELL
DELL 8JRN4 900GB 2.5" SAS 10000 RPM laptop hard drive
A 900 GB 2.5 inch SAS drive spinning at 10000 RPM with a hot-swap tray for Dell PowerEdge servers
- PackagingOEM
- InterfaceSerial Attached SCSI (SAS)
- RPM10000 RPM
- UsageIdeal for Servers
- Form Factor2.5"
- 900 GB capacity expands server storage
- 10 000 RPM spindle speed accelerates data access
- SAS 6 Gb/s interface enables fast transfers
- 5 inch form factor fits dense bays
- Hot-swap tray included simplifies drive replacement
Capacity and interface
This is a 900 GB 2.5 inch internal hard drive with a Serial Attached SCSI interface operating at 6 Gb/s. It spins at 10000 RPM to deliver fast disk access for transactional workloads. The drive ships new in OEM packaging with a hot-swap tray included. It is built for Dell PowerEdge servers and compatible workstations.
Sustained workload behaviour
The 10000 RPM spindle speed maintains consistent throughput for random I/O patterns typical of database and virtualisation tasks. SAS signalling at 6 Gb/s supports dual-port redundancy and multipath I/O for high-availability configurations. Mechanical latency stays predictable during extended duty cycles in multi-drive arrays. The hot-swap tray allows replacement without powering down the enclosure.
Compatibility checklist
Verify that your server or storage system accepts 2.5 inch SAS drives with a 6 Gb/s backplane and the correct carrier keying. Confirm the controller supports the drive’s capacity and rotational speed within its firmware compatibility list. Ensure the chassis provides adequate cooling for 10000 RPM devices in the target slot. This drive is not suited for laptops or consumer desktops lacking SAS controllers and hot-swap bays.
Highlights
- 900 GB capacity expands server storage
- 10 000 RPM spindle speed accelerates data access
- SAS 6 Gb/s interface enables fast transfers
- 5 inch form factor fits dense bays
- Hot-swap tray included simplifies drive replacement
Specifications
| Brand | Dell |
|---|---|
| Packaging | OEM |
| Interface | Serial Attached SCSI (SAS) |
| RPM | 10000 RPM |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Shipping weight | 0.68 kg |
| Package size | 137 × 79 × 15 mm |
Questions about this item
How much power and heat does the 10000 RPM SAS drive produce when running continuously in a server?
The 2.5" 10000 RPM SAS drive is designed for server workloads; its spindle speed and 6Gb/s interface indicate higher sustained power draw and heat output than slower laptop drives, so ensure your chassis provides adequate airflow.
What existing hardware is required to install this 900GB SAS drive in a Dell PowerEdge server?
You need a compatible Dell PowerEdge server with a 2.5" hot-swap SAS backplane and a SAS controller or RAID card that supports 6Gb/s SAS; the included tray fits the standard drive bay.
Will this 6Gb/s SAS drive work alongside older 3Gb/s SAS drives in the same PowerEdge array?
Yes, the 6Gb/s SAS interface is backward compatible with 3Gb/s SAS backplanes and controllers; the drive will negotiate the lower link speed automatically while sharing the same enclosure.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
