DELL
DELL 6TB SAS 3.5" 7.2K 12G internal hard drive 400-AJOE 400-ANFC 400-AKWQ 400-AIUC 400-AFUY
A 6 TB SAS hard drive spinning at 7.2 K rpm with a 12 Gb/s interface, supplied in a 3.5 inch caddy that fits Dell PowerEdge R210 through R930 servers
- 6 TB capacity stores large datasets
- 12 Gb/s SAS interface enables fast data transfer
- 2 K RPM spindle speed delivers consistent throughput
- 5 inch form factor fits standard drive bays
- Supplied with Dell caddy for direct server installation
6 TB SAS 3.5" drive for Dell servers
This 6 TB SAS hard drive spins at 7.2K RPM and connects through a 12 Gbps interface. It is built for Dell PowerEdge servers that accept 3.5 inch SAS drives. The drive suits administrators who need bulk capacity for archives, backups or secondary storage arrays.
Includes compatible Dell caddy for direct mounting
A Dell caddy ships with the drive so it slides straight into supported PowerEdge bays without extra hardware. The tray matches the mounting points of the R210, R220, R230, R310, R320, R330, R410, R415, R420, R430, R510, R520, R530, R530XD, R630, R710, R715, R720, R720XD, R730XD, R730, R900, R905, R920 and R930 lines. Builders using non-Dell chassis or 2.5 inch bays cannot use this kit.
7.2K spindle balances heat and power
At 7.2K RPM the drive generates moderate heat and steady acoustic output typical of nearline SAS spindles. Power draw stays within the limits of a standard 12 Gbps backplane, so no special cooling or upgraded power supply is required for normal operation. The drive is not intended for high-IOPS transactional workloads that demand 10K or 15K speeds.
Highlights
- 6 TB capacity stores large datasets
- 12 Gb/s SAS interface enables fast data transfer
- 2 K RPM spindle speed delivers consistent throughput
- 5 inch form factor fits standard drive bays
- Supplied with Dell caddy for direct server installation
Specifications
No published specifications for this item yet.
Questions about this item
What does the 12G SAS interface limit in real use?
The 12G SAS link caps the drive at its native 7.2K RPM throughput, so sustained transfers top out around the mechanical ceiling rather than the bus ceiling.
Which Dell servers accept the supplied 3.5" caddy?
The caddy fits R210 Gen I and II, R220, R230, R300, R310, R320, R330, R410, R415, R420, R430, R510, R520, R530, R530XD, R630, R710, R715, R720, R720XD, R730, R730XD, R900, R905, R920 and R930.
What step is often missed when installing the drive into the caddy?
People forget to seat the four side screws flush before sliding the caddy into the bay, leaving the drive loose and causing vibration errors.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
