DELL
DELL 400-AUWX 2 TB 7200 RPM SAS 6Gb/s 3.5" internal hard drive
A 3.5 inch internal hard drive with 2 TB capacity, 7200 RPM speed and a SAS 6Gb/s interface for hot-plug server and desktop use
- InterfaceSAS 6Gb/s
- Capacity2TB
- Form Factor3.5"
- 2 TB capacity stores large data volumes
- SAS 6Gb/s interface delivers high transfer rates
- 7200 RPM spindle speed ensures strong performance
- Hot-plug 3.5" form factor allows drive swaps without shutdown
- Compatible with Dell PowerEdge R430 R530 R730 T430 T440 T640
Dell 2 TB SAS 6Gb/s 3.5" Hard Drive
The Dell 400-AUWX is a 2 TB internal hard drive with a 7200 RPM spindle speed and a SAS 6Gb/s interface. It uses a 3.5 inch form factor and supports hot-swap operation. The drive is designed to increase storage capacity in compatible Dell systems.
Server and desktop storage expansion
This drive suits administrators adding bulk storage to supported Dell PowerEdge servers such as the R430, R530, R730, T430, T440 and T640. It also fits compatible Dell desktop PCs. Builders needing a different interface or a non-hot-swap mechanical drive should look at other options.
SAS 6Gb/s interface
The SAS 6Gb/s interface is the single specification that decides compatibility. Your system backplane or controller must support this exact interface standard for the drive to function correctly.
Highlights
- 2 TB capacity stores large data volumes
- SAS 6Gb/s interface delivers high transfer rates
- 7200 RPM spindle speed ensures strong performance
- Hot-plug 3.5" form factor allows drive swaps without shutdown
- Compatible with Dell PowerEdge R430 R530 R730 T430 T440 T640
Specifications
| Brand | Dell |
|---|---|
| Interface | SAS 6Gb/s |
| Capacity | 2TB |
| Form Factor | 3.5" |
Questions about this item
Does my system need a SAS 6Gb/s backplane to install this 3.5" drive?
Yes, the drive connects through a SAS 6Gb/s interface and requires a compatible backplane or controller that supports SAS signalling.
Will this 7200 RPM SAS drive work in a Dell PowerEdge R430 alongside existing SATA drives?
The R430 3.5" bay accepts this drive, but SAS and SATA drives cannot share the same virtual disk; they must be managed in separate arrays.
How can I confirm the drive is recognised at 6Gb/s after installation?
Check the controller BIOS or Dell OpenManage — the drive should appear as a 2 TB SAS device negotiating a 6Gb/s link speed.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
