DELL
DELL 400-AUUY 1.2TB 2.5" SAS 12Gb/s 10000 RPM internal hard drive
A 1.2 TB 2.5" SAS 12Gb/s drive spinning at 10,000 RPM with hot-swap capability for fast internal storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 2 TB capacity stores large data volumes
- 10,000 RPM spindle speed enables fast disk access
- SAS 12Gb/s interface delivers high data transfer rates
- 5 inch form factor fits dense server bays
- Hot-plug design allows drive replacement without downtime
Dell 400-AUUY 1.2TB SAS drive
The Dell 400-AUUY is a 1.2TB internal hard drive built for 2.5-inch bays and SAS 12Gb/s interfaces. It spins at 10000 RPM and ships as a bare drive with hot-swap capability. The 512n sector format supports direct integration into compatible arrays.
Suits servers needing hot-plug 10K SAS storage
This drive fits administrators who need 1.2TB of 10000 RPM capacity on a 12Gb/s SAS link with hot-plug support. Buyers whose systems only accept 3.5-inch carriers or lack a SAS backplane cannot use this drive in its supplied form. Environments requiring larger capacities or different interfaces should consider other options.
12Gb/s SAS interface decides compatibility
The single specification that determines fit is the 12Gb/s SAS interface. The drive communicates exclusively over this protocol, so the host controller and backplane must support SAS 12Gb/s operation. Without a matching SAS connection the drive will not function.
Highlights
- 2 TB capacity stores large data volumes
- 10,000 RPM spindle speed enables fast disk access
- SAS 12Gb/s interface delivers high data transfer rates
- 5 inch form factor fits dense server bays
- Hot-plug design allows drive replacement without downtime
Specifications
| Brand | Dell |
|---|---|
| Model | 400-AUUY |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
Questions about this item
Does this 2.5" SAS drive need a 3.5" hybrid carrier to fit in my server bay?
Yes, the drive ships with a 3.5" hybrid carrier so the 2.5" unit mounts directly in a standard 3.5" hot-swap bay.
What is the correct way to hot-plug this 12Gb/s SAS drive without causing detection errors?
Insert the carrier firmly until the latch clicks while the backplane is powered; the SAS connector seats last, so do not force the drive past the first resistance point.
When should I expect to replace the 1.2TB 10000 RPM mechanism in a RAID array?
Monitor SMART reallocated-sector counts and schedule a swap once the counter begins to climb, typically after several years of continuous operation.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
