DELL
DELL 400-ANTX 10TB 3.5" SAS 7.2K 12Gb/s internal hard drive
10 TB 3.5-inch SAS drive spins at 7.2K RPM with a 12 Gb/s interface for high-capacity server storage
- NAND Flash Memory TypeSLC
- 10 TB capacity for large data sets
- 12 Gb/s SAS interface for fast transfers
- 2 K RPM spindle speed for steady performance
- 5 inch hot-swap form factor for easy maintenance
10 TB 3.5" SAS hot-swap drive
The Dell 400-ANTX is a 10 TB internal hard drive built for 3.5-inch bays with a SAS 12 Gb/s interface and 7.2K spindle speed. It ships new and supports hot-swap operation in compatible enclosures. SLC NAND flash memory is included on the drive.
Suits arrays needing 12 Gb/s SAS capacity
This drive fits servers and storage arrays that accept 3.5-inch SAS devices running at 12 Gb/s. Systems limited to slower SAS links or different physical form factors cannot accommodate it. Buyers requiring a non-SAS interface should consider other options.
Highlights
- 10 TB capacity for large data sets
- 12 Gb/s SAS interface for fast transfers
- 2 K RPM spindle speed for steady performance
- 5 inch hot-swap form factor for easy maintenance
Specifications
| NAND Flash Memory Type | SLC |
|---|
Questions about this item
What controller or backplane is required for the 12Gb/s SAS interface on the 400-ANTX drive?
The drive needs a SAS controller or backplane that supports 12Gb/s SAS signalling. A 6Gb/s SAS port will work but limits the link to 6Gb/s.
Can the 400-ANTX 10TB drive share a 6Gb/s SAS backplane with older 7.2K drives?
Yes. The drive negotiates down to 6Gb/s on a 6Gb/s backplane and runs alongside other 7.2K SAS drives without conflict.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



