We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch Dell hard drive with label showing 400-AJQP 1.8 TB 10K SAS 12Gbps

DELL

Dell 400-AJQP 1.8 TB 10K SAS 12Gbps 2.5" hard drive

SKU CH-9660-D6XR6

A 1.8 TB internal hard drive with a 10,000 rpm spindle and 12 Gb/s SAS interface in a 2.5 inch form factor

  • 8 TB capacity stores large datasets
  • 10000 rpm spindle delivers fast data access
  • SAS 12Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

Dell 1.8 TB 10K SAS 12Gbps Drive

This Dell 400-AJQP internal hard drive provides 1.8 TB of storage in a 2.5 inch form factor. It operates at 10,000 rpm with a 12Gb/s SAS interface for enterprise workloads. The unit is supplied new from the manufacturer.

Suits 12Gb/s SAS Arrays

This drive suits servers and storage arrays with 12Gb/s SAS backplanes and 2.5 inch bays. It is not for systems limited to 6Gb/s SAS backplanes. It is also not for platforms requiring a 3.5 inch form factor or a different interface standard.

12Gb/s SAS Interface Decides Fit

The single specification that decides compatibility is the 12Gb/s SAS interface standard. The host controller and backplane must support this exact signalling rate. Verify the system accepts 2.5 inch drives before purchase.

Highlights

  • 8 TB capacity stores large datasets
  • 10000 rpm spindle delivers fast data access
  • SAS 12Gb/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • New condition ensures full manufacturer reliability

Specifications

BrandDell

Questions about this item

What controller or backplane do I need to run the 12 Gbps SAS interface on this drive?

You need a SAS controller or backplane that supports 12 Gbps SAS signalling; the drive uses a standard SAS connector and will negotiate down to 6 Gbps if the host only supports that speed.

Will the 2.5 inch form factor fit in the same drive bays as my existing 2.5 inch SAS drives?

Yes, the 2.5 inch form factor matches standard 2.5 inch SAS hot-plug bays and caddies, so it installs alongside other 2.5 inch SAS drives without adapters.

How can I verify the drive is running at 10 000 rpm and 12 Gbps after installation?

Check the drive properties in your RAID controller BIOS or OS utility; it should report 10 000 rpm spindle speed and a negotiated link speed of 12 Gbps SAS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.