DELL
DELL 400-AJQN 1.8TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive
A 1.8TB 2.5-inch SAS drive spinning at 10000 RPM with a 12Gb/s interface for fast internal storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity1.8TB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 8 TB capacity stores large data volumes
- 10000 RPM spindle speed provides fast disk access
- SAS 12Gb/s interface delivers high transfer speeds
- 5 inch form factor fits compact drive bays
- Hot-swappable design enables drive replacement without downtime
Dell 1.8 TB SAS Drive
The Dell 400-AJQN is a new 1.8 TB internal hard drive with a 2.5 inch form factor. It connects via a SAS 12 Gb/s interface and spins at 10,000 RPM for fast data access. The drive is hot-pluggable and ships as a bare unit without a caddy or bracket.
Suits high-performance arrays
This drive suits administrators expanding Dell PowerEdge servers or storage arrays that accept 2.5 inch SAS hot-plug drives. The 10K spindle speed supports demanding workloads such as databases or virtualisation. It is not for systems that only accept 3.5 inch bays or that lack a SAS backplane and controller.
12 Gb/s SAS interface
The single specification that decides fit is the 12 Gb/s SAS interface. Your server or enclosure must provide a compatible SAS backplane and controller running at this speed. If the system uses a different drive protocol or cannot negotiate 12 Gb/s, the drive will not function correctly.
Highlights
- 8 TB capacity stores large data volumes
- 10000 RPM spindle speed provides fast disk access
- SAS 12Gb/s interface delivers high transfer speeds
- 5 inch form factor fits compact drive bays
- Hot-swappable design enables drive replacement without downtime
Specifications
| Brand | Dell |
|---|---|
| Model | 400-AJQN |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
| Shipping weight | 0.68 kg |
| Package size | 140 × 89 × 51 mm |
Questions about this item
Will the 2.5" form factor fit my server's hot-swap bay?
The drive uses a standard 2.5" form factor designed for hot-swap bays that accept SAS drives; verify your chassis supports 2.5" SAS trays before ordering.
How do I install the drive and what step is often missed?
Slide the drive into the hot-swap tray until the connector seats firmly, then lock the lever; the step often missed is ensuring the tray latch clicks fully to complete the SAS 12Gb/s connection.
When will the 10,000 RPM drive need replacement?
Enterprise 10,000 RPM SAS drives typically run several years under normal workloads; monitor SMART attributes and replace when reallocated sectors or latency increases appear.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
