DELL
DELL 400-AJQC 300GB 2.5" SAS 12Gb/s 10000 RPM internal hard drive
A 300 GB SAS hard drive spinning at 10 000 RPM with a 12 Gb/s interface in a 2.5 inch hot-swap form factor
- InterfaceSAS 12Gb/s
- Capacity300GB
- RPM10000 RPM
- Form Factor2.5"
- 300GB capacity stores critical datasets efficiently
- 10000 RPM spindle speed accelerates transactional workloads
- SAS 12Gb/s interface delivers high-throughput connectivity
- 5-inch form factor fits dense server bays
- Hot-swap tray enables drive replacement without downtime
Dell 400-AJQC 300GB SAS 10K Drive
This Dell 400-AJQC is a 300GB 2.5" internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is built for Dell servers and storage arrays that require a hot-swap tray. The drive delivers enterprise-grade reliability for mission-critical workloads.
Suits SAS 12Gb/s hot-swap bays.
This drive fits 2.5" hot-swap bays using a SAS 12Gb/s backplane. It is not suitable for systems that only accept SAS 6Gb/s or other interface types. Buyers needing larger capacity or a different form factor should consider other models.
SAS 12Gb/s interface determines compatibility
The single specification that decides fitment is the SAS 12Gb/s interface combined with the 2.5" hot-swap form factor. Your server or array must support this exact interface speed and physical tray type for the drive to function correctly.
Highlights
- 300GB capacity stores critical datasets efficiently
- 10000 RPM spindle speed accelerates transactional workloads
- SAS 12Gb/s interface delivers high-throughput connectivity
- 5-inch form factor fits dense server bays
- Hot-swap tray enables drive replacement without downtime
Specifications
| Brand | Dell |
|---|---|
| Model | 400-AJQC |
| Interface | SAS 12Gb/s |
| Capacity | 300GB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Questions about this item
Does my server or storage array need a 12 Gb/s SAS backplane to use the 400-AJQC at full speed?
The drive uses a SAS 12Gb/s interface; a 12 Gb/s backplane or HBA is required to reach the rated transfer rate, though it will negotiate down on older 6 Gb/s SAS infrastructure.
Can I mix this 10000 RPM SAS drive with slower SAS drives in the same array?
Mixing drives of different rotational speeds in a single RAID volume is not recommended; the array will perform at the speed of the slowest member and rebuild times may increase.
How can I verify the 400-AJQC is running at 12 Gb/s after installation?
Check the negotiated link speed in your RAID controller BIOS, HBA utility, or OS storage tools — it should report 12 Gb/s for this drive.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
