DELL
DELL 400-AJOS 300GB 2.5" SAS 10000 RPM 12Gb/s internal hard drive
A 300 GB 2.5 inch SAS drive spinning at 10000 RPM with a 12 Gb/s transfer rate and hot-swap tray
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity300GB
- RPM10000 RPM
- Average Latency12Gb/s
- Form Factor2.5"
- 300 GB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell 400-AJOS 300GB SAS Drive
The Dell 400-AJOS is a new 300GB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It arrives as a bare drive with hot-swap capability for direct installation into compatible drive bays.
Suited for 10K SAS environments
This drive fits servers and storage arrays that accept 2.5-inch SAS drives running at 12Gb/s and require 10000 RPM performance. It is not for systems lacking a SAS backplane or controller, nor for users who need larger capacities or solid-state latency.
12Gb/s SAS interface decides fit
The single specification that determines compatibility is the SAS 12Gb/s interface; the host must provide a matching SAS connection and support 2.5-inch hot-swap trays for this drive to function.
Highlights
- 300 GB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS 12 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Specifications
| Brand | Dell |
|---|---|
| Model | 400-AJOS |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 300GB |
| RPM | 10000 RPM |
| Average Latency | 12Gb/s |
| Form Factor | 2.5" |
Questions about this item
Does my server need a 12 Gb/s SAS controller to use the 400-AJOS drive?
The drive uses a SAS 12Gb/s interface so the host controller must support that speed for full performance.
Can I keep my existing 6 Gb/s SAS backplane when adding this 10000 RPM 2.5" drive?
The 400-AJOS is backward compatible with 6 Gb/s SAS backplanes but will run at the lower link speed.
How can I confirm the 300 GB drive is operating at 12 Gb/s after installation?
Check the negotiated link rate in your RAID controller BIOS or OS utility; it should report 12 Gb/s for this model.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
