DELL
DELL 341-4733 146 GB SAS 10000 RPM 2.5" laptop hard drive
A 146 GB, 10,000 RPM SAS drive with a 16 MB buffer in a hot-swappable 2.5" form factor for compatible Dell PowerEdge servers
- InterfaceSAS
- Cache16MB
- RPM10000 RPM
- 146 GB capacity stores more server data
- 10000 RPM spindle speed accelerates data access
- 16 MB buffer smooths burst workloads
- 3Gb/s SAS interface connects to compatible controllers
- Hot-swappable 2.5" form factor fits Dell PowerEdge servers
Dell 341-4733 SAS drive
The Dell 341-4733 is a 146 GB SAS internal hard drive spinning at 10000 RPM with a 16 MB cache. It uses the 3Gb/s SAS interface standard and a 2.5 inch form factor. This new drive is designed for server environments requiring hot-swappable storage. It fits compatible Dell PowerEdge servers needing high-speed mechanical storage.
Fits PowerEdge 1950 and 2950 servers
The drive measures .6 inches high, 2.8 inches wide and 3.9 inches deep, weighing approximately 1.30 lb. Its hot-swappable design allows replacement without powering down the server chassis. It connects directly to a SAS backplane or controller supporting the 3Gb/s standard. This frees up a drive bay for capacity expansion in supported Dell PowerEdge 1950, 1955, 2950, 6850, M805 and M905 models.
Sustained 10000 RPM operation
Under continuous load the spindle maintains 10000 RPM to deliver consistent throughput for server workloads. The 16 MB buffer helps smooth burst I/O across the SAS interface. Mechanical latency remains stable during extended read and write sequences. The drive is built for always-on operation in compatible Dell PowerEdge server platforms.
Highlights
- 146 GB capacity stores more server data
- 10000 RPM spindle speed accelerates data access
- 16 MB buffer smooths burst workloads
- 3Gb/s SAS interface connects to compatible controllers
- Hot-swappable 2.5" form factor fits Dell PowerEdge servers
Specifications
| Brand | Dell |
|---|---|
| Interface | SAS |
| Cache | 16MB |
| RPM | 10000 RPM |
Questions about this item
Does the 10000 RPM spindle speed cause thermal throttling under sustained workloads?
The drive is built for server environments and listed as compatible with Dell PowerEdge 1950, 1955, 2950, 6850, M805 and M905 servers, which are designed to cool 2.5" SAS drives at full speed.
How much noise and heat does the drive produce when running continuously?
The 2.5" form factor at .6" height and 1.30 lb weight fits standard hot-swap server bays where airflow is managed by the chassis, not the drive itself.
Which server backplane or controller is required to use this 3Gb/s SAS drive?
It connects via a 3Gb/s SAS interface and is validated for the Dell PowerEdge models listed, so a compatible SAS backplane or HBA in one of those servers is needed.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
