DELL
DELL 1100W server power supply T320 T420 T620 R520 R620 R820 0NTCWP
Delivers 1100 W to compatible Dell PowerEdge T320, T420, T620, R520, R620 and R820 servers
- 1100W output powers demanding Dell PowerEdge servers
- Compatible with T320, T420, T620, R520, R620 and R820 models
- Hot-plug design enables replacement without system downtime
- Multiple part numbers 0NTCWP, 0YT39Y, GYH9V, 0GDPF3 ensure correct identification
1100W server power supply for Dell T320 T420 T620
This 1100 watt unit is built for Dell PowerEdge servers including the T320, T420, T620, R520, R620 and R820. It fits the standard redundant power bay used across these platforms. The supply is offered in new condition and matches part numbers such as 0NTCWP, 0YT39Y, GYH9V and 0GDPF3. It is intended for administrators replacing a failed module or adding redundancy to a supported chassis.
Capacity and headroom for Dell PowerEdge
At 1100 watts the supply handles typical dual-processor configurations with multiple drives and expansion cards in the listed servers. Headroom decreases when both CPU sockets are populated with high-wattage processors, many storage devices are installed, or several PCIe cards draw auxiliary power. In those scenarios the unit may reach its limit and a higher-rated module would be required. It is not suited for systems needing more than 1100 watts or for chassis that use a different form factor.
Highlights
- 1100W output powers demanding Dell PowerEdge servers
- Compatible with T320, T420, T620, R520, R620 and R820 models
- Hot-plug design enables replacement without system downtime
- Multiple part numbers 0NTCWP, 0YT39Y, GYH9V, 0GDPF3 ensure correct identification
Specifications
No published specifications for this item yet.
Questions about this item
Will the 1100W Dell power supply fit alongside existing components in my PowerEdge T320 without clearance issues?
The unit is designed as a direct replacement for the original power supply in PowerEdge T320, T420, T620, R520, R620 and R820 servers, matching the standard form factor and connector layout used in those chassis.
How can I verify the 1100W Dell power supply is operating correctly after installing it in my R620?
After installation, the server's iDRAC management interface will display the power supply status, input voltage, output wattage and health LED state, confirming the unit is recognised and delivering power within specification.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



